Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,does anyone know if its possible to syncronize call-lists (placed calls, missed calls etc) between phones sharing the same line?Regards, Frank
Dear all. We have cisco CUCM 8.6 and C2951 router for GW. It was working perfectly before. But today when i call from outside to CUCM, it says "Number you have dialed not exist" (unallocated and unassigned number). But Telco says there are no problem...
Hi ,I am facing issue with my outgoing calls, i have configured mgcp on the remote location with my call manager 8.6.I am unable to dial outgoing number but my incoming numbers are working fine. Please help me on this.Please find below the debug isdn...
Hi everyone. We have cisco CUCM 8.6 and C2951 router for gateway. We also have E1 for the telco line. It worked perfectly before. But now it can't call outside from the CUCM and also can't call from outside to CUCM. When i call to CUCM main number (t...
Does the changing of the Service Parameter "Maximum MeetMe Conference Unicast" to a higher value require the restarting of any phone disrupting services?Thanks
I am fairly new to UCCE. I would like to point a DN to a queue script.How is this done?Thanks - Keith
Group,Have some issues to run by you to get the experts opinion. Let's start with the setup:HQ2911 RouterSF300P Switches with QOS in basic mode, Voice VLAN 1SPA504 IP Phone(s)DC <-- Asterisk PBX located here with other SPA504 phonesWhats happening:So...
We are doing a jump upgrade from 7.1.5 to 9.1 and are ready for the switch-over.As a preparation we have already upgraded all the phones to the firmware that comes with CUCM 9.1.Can anyone tell me what will happen with the phones at the moment of the...
We've been able to successfully connect 2 PRI T1's from the F9600 to the CUCM 9.1.1. While both systems are capable of calling each others numbers, we've hit a roadblock on forwarding.Since we don't have Unity Connect loaded yet, I'd like to forward...
Dear allWe have 2 server details as below:HW Platform : 7825I4Processors : 1Type : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHzCPU Speed : 3000Memory : 2048 MBytesAbout 400 Phones are registered ,approx...
Hi, Do we need to signed the CUCM certifcate for SIP trunking with the central CA , as we already have signed the TOMCAT certificate for third party integration.
Hey all,this is an issue that's come up with an install with a customer of mine right now. It's a major problem for them as they have a LOT of speed dials. They've migrated from UCME where, of course, this was done through speed-dial lists. It's a an...
Dear All,my issue is that we have CME Router cisco 2911, all old phones has Company Background which is located on flash of the CME, but when i add any new phones i am not able to find the Company Background, but all old phones has the company Image....
Hi all,I'm invited to install a cisco IP Telephony in Remote Site for the company that already have an exsiting TOIP infrastructure.The CUCM in the Headquarter use e-token for encrypt voice ( RTP and Signaling). I have two questions about SRST:1- Wh...
Hello all,Has anyone had trouble with their Cisco ATA-187 devices on the latest firmware (9.2.3)? I have about five of these in the field, and since I updated to the lastest available firmware I have had a problem with the devices sporadically going...
