Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi I have configured SRST and Phones are getting registered succesfully. For SRST phones need to make outgoing calls via E1 and should change the calling number, i tried using translation rule. but in debugs number is not translated. dial-peer and tr...
Hello,I have recently been struggling with DTMF relay configuration in which the provider has issues with in-band DTMF transport and has requested DTMF's to be delivered out-of-band. Examining the SIP INFO and the SIP NOTIFY methods for out-of-band D...
Hi,Im just after some information of whether ive configure my VoIP test network correctly. Im using 48Port POE 2960 and Siemens Openstage 15 phones.Switch Configlldp runinterface FastEthernet0/1 switchport access vlan 125 switchport mode access switc...
Hello,we have a CUCM 8.6.x, and we would like that caller name appears on the IP Phones on incoming external calls (e.g., from PSTN or another PBX).Is there a way to obtain that only with CUCM?If not, is there an external solution (possibily free) to...
Dear All We have faced a problem, recently we have migrated to a CUCM9 we simply import our config to the CUCM (after solving its problem), after switching to new CUCM we had issues with some phones, hence we deleted the configuration security trus...
Hi All, I have created some 4 digit DNs in CUCM to use as speed dials, these are forwarded (Forward All) to mobile numbers. When you dial one of these 4 digit numbers eg. 4444 from an IP phone it displays the text I enter in the 'Alerting Name' fiel...
Can I go from Cisco IOS Software, vg224 Software (vg224-I6S-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)To version 15.1.4M6 or is there a couple versions i have to upgrade to first before i go to 15.1.4m6.Thank You.
I have sort of an needle in a haystack issue I am dealing with and hoping someone might be able to point me at something to try or look at.I have a remote location at completely random times and from completely random numbers when the location is cal...
Hi,Could someone help me to get some clarity on what features our client would loose if they decided to re-use their existing 3rd Party SIP devices rather than purchasing new Cisco IP Phones (e.g. 7841) on a new BE6K solution. They would like to pote...
Hi.We have a speed-dial configured on our CUCM to a webex service audio conferencing number (on the PSTN); but sometimes this number are out of service. It is possible configure redudancy -when the first number were out of service- to another PSTN nu...
Im am trying to install IP communicator on my laptop. Install went fine but when phone is trying to register I get Registration Rejected: Error DBConfig. I am running CM 6.1 and communicator 7.0.
When I try to register a cisco 7940 iphone I get the "version error" - from research it said to double check to make sure you have the right model phone. I do have the correct phone type specified but still gets this error When an attempt...
Hi,Please can anyone explain the call routing rules in Unity Connection.Below is my understanding of call routing rules.Direct Routing Rules.Rule 1:Attempt sign-in:Applied to any calls which are directly dailed into the CUC and the user has the mailb...
Hello,We are getting the following alerts fro the Cisco Unity Connection:Can somebody help me how to resolve this ? Can this crash the system if not resolved? From Fri Dec 20 15:49:01 EST 2013 to Fri Dec 20 15:59:01 EST 2013 on node 10.4.1.41, there...
All,I have a CUC 9.x cluster with 2 servers in it. Trying to add a 3rd but under System Settings, Cluster, "Add New Server" is grayed out. I found the link below but none of the scenarios seems to apply to me. Not running Business Edition and...
