IP Telephony and Phones

Basic QoS questions

Hello,Out company is finally going to install VOIP, they will be using something called Natterbox, but I've been asked to add QoS to our Cisco switches and routers in various locations I will also need to add a second VLAN for voice I believe which i...

Using CTI Remote Device together with DVO-R on one user

Hi,We have a situation where some users want to use both a CTI Remote Device using Jabber for Windows and use DVO-R using Jabber for iPhone. For DVO-R, we need to add a Mobile Identity to the user's TCT (Jabber for iPhone) device. This Mobile Identit...

Feature "Show All Calls on Primary Line"

Hi Community,we're facing some curiosity with the feature - show all calls on primary line.Just for troubleshooting I recreate an issue - I tested with an CallManager in Version8.5.1.14900-5. In this Version there was the feature under phones - SIP89...

unable to install CUCX9 under VmWare

Hii tried 3 times to install a CUCX under Vmware and it has been imposible, just at the finish of the installation, in the last script, always shows this message and halt the installation.I review DNS, IPS, and so on but always fails, does anybody kn...

Unity Connection Auto Attendant direct to voice mail, MWI issue

hi,First time encountering this issue with call transfer from AA and MWI.An Auto Attendant have been setup for a branch office. All employees at the Branch office phones are assigned a DID.Customers can dial the 10 digit or dial the main line (aut...

Issues with Login on CUPC with CUPS

Hi AllI resently had a fully working system using the following software versions and configuration:CUCM Version: 8.5.1.12900-7CUPS Version: 8.0.0.39051-20Active DirectoryDNSLDAPI have a single cluster using demo licences in a VMware lab enviroment. ...

Cisco881V - C881 Voice - BRI ports remain unregistered CUCM9.1

Hi,I try to configure a C881 voice gateway with a CUCM 9.1 using MGCP Protocol.The two BRI ports remain unregistered.On the gateway configuration web page it has four "subunits"... but this gateway has only BRI1 & BRI2 (no slot/subunit....) and if I ...

Unity 7 - Media master issue

Hi,we have recorded custom prompt as wav file and wanted to download the file from media master "paste from file". but this option is grayed out in unity. I've run dbwalker and didn't return any error message. any suggestion would be much appreciated...

Translation profile issue

I have a two 3925 gateways, connected to a 8.6.2a Communications Manager . the gateways are in different locations. I am trying to get an AA working on Unity Connection . I setup a CTI route Point that shows not registered, I have the Callhandler set...

CME 7.1 transfer-consult question

Hi,The scenario:CME 7.1 with 15.0.1M9 IOS versionPHONE A gets CALL 1, transfers (with the intent to do a consult transfer) to PHONE B. While this call is ringing in PHONE B another call (CALL 2) comes from PHONE C into PHONE A. PHONE A answers PHONE ...

MOH working intermittently....

I uploaded a new wav file and now the MOH is working for some calls but not others. I've checked the file type and it is correct. Station to station and park it doesn't work but sometimes it works for outside calls. Everything looks OK in RTMT but ...

CCM 4.13 query

I am trying to find out how many times a route pattern is used. Is there a query I can run?

CME holidays and Night service to 3rd party answering service

I have the nightservice properly configured to route calls while the office is closed. All holidays are entered into Unity. I am not usind a AA. What is the best way to have holiday calls routed to the answering service? Incoming calls route ...

CUE-ATT-CON VERSION 8.0

Hi, We have one licnesing to CUE-ATT-CON and we need configure 6 console operators.They CUE-ATT-CON support 6 operatos?Regards,Martin

Resolved! Default 3 beep tones when no MOH

Hello,We've set up our phones into Device Pools with MRLG contening no MOH ressources. Then when on hold (network or user) we have a default 3 beep tone instead of other audio sources. So far it's what we wanted.But I need to play some kind of music ...

IP Telephony and Phones

Forum Posts

Basic QoS questions

Using CTI Remote Device together with DVO-R on one user

Feature "Show All Calls on Primary Line"

unable to install CUCX9 under VmWare

Unity Connection Auto Attendant direct to voice mail, MWI issue

Issues with Login on CUPC with CUPS

Cisco881V - C881 Voice - BRI ports remain unregistered CUCM9.1

Unity 7 - Media master issue

Translation profile issue

CME 7.1 transfer-consult question

MOH working intermittently....

CCM 4.13 query

CME holidays and Night service to 3rd party answering service

CUE-ATT-CON VERSION 8.0

Resolved! Default 3 beep tones when no MOH

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

CUCM sends wrong device ID to Recording System

CDR reports: Request for activity on multiple lines

I get dozens of these alarms on WU, but no errros on controller

Transfer Caller ID and 8800 Line Buttons CME

UCCX upgrading Error encountered: The selected file is not valid.

Common Phone Profile 8841

Cisco MTP resets needed sometimes 2x per week? Is this necessary?

Cisco CP-8861 3PCC unable to dial using call history list.

CUBE - SIP trunk and Cause 65 Bearer capability not implemented

call forward not working with the uccx agent