Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello, Need some help. We have a bunch of DID's that have a number 424-865-63XX and we want to change the number when called to a different extension when it is called. For example, when someone calls 424-865-6380 we want it to ring on internal ext 3...
I'm currently migrating to 4331 ISR's from 2800 series routers. Has anyone had issues with the NAME: "NIM subslot 0/2", DESCR: "NIM-2FXS/4FXO Voice Analog Module"PID: NIM-2FXS/4FXO , VID: V01, SN: FOC20375GE1 NAME: "PVDM subslot 0/4", DESCR: "PVDM4-...
Hi All,I've been setting up Cisco MRA using Exp-E and Exp-C and a CUCM 11.5 in the inside. I have followed all the guides, both expressways are up, the traversal zone is up and running on both sides. I can succesfully register jabber when i'm inside ...
Hello!I need to check some client for correct auth.I make small tools for it:https://github.com/OlegPowerC/SIPdigestCalculatorUsage:SIPdigestcalculator.exe -u username -r realm -p password -n nonce -uri SIP URIorSIPdigestcalculator.exe -u username -r...
Is there a fairly easy way to use a Cisco up phone as a normal landline in my house? I would like to use one in my office at home without the need for a complicated set up. Just wondered if it was possible with some know how?
Hi,I have been working on getting LDAP set up on Cisco Unity Connection server so my users dont have to manually type in a voicemail password in Jabber. I thought I had this acomplished! On Jabber Desktop, everything automatically signs in incl voic...
Hi cisco I received one request for voice mail in unity connection with a scenario :once a customer call extension from 1 pm to 2 pm the customer should be hiring the voice mail directly once a customer call extension after working hours and weeken...
I have an older ATA 191 that i am trying to get Multiplatform Firmware loaded too. The existing Web UI does not have the options under the administration area to send the command to update from a local TFTP. I also found a couple deployment guides th...
Hello Everyone,i have a wired situation with my customer about Cisco jabber call over VPN of forti.when user call to external number from Cisco phone that register to his LAN the calls work perfectly.when user call to external number from CSF Device ...
Hello, Is there a way to get a French documentation about Cisco Unity connection system administration or to set up the Cisco Unity Connection System administration UI on French ? I installed new language by following this documentationhttps://www.c...
Any one need to manually activate recording on jabber mobile iPhone or iPad? I see the 'custom tab' but I don't know if it is possible to configure it.OR - if exist an other possibility...
Hi, Opus can take anywhere between 5kbps and 0.5Mbps per call. However we have some low-bandwidth links and we'd like to ensure number of calls over these links, while also not hurting other application bandwidth. For example, capping a single opus c...
I am now working from home. I was given my CISCO 7965 phone to use. When I plugged it in to my ethernet cord coming off the modem, it would not power up. Any ideas?Shouldn't it just plug in and boot like it does at the office? Doesn't it have its...
Does anyone still have the firmware file for Cisco 7941 SCCP version 8.5(2)? cmterm-7941-7961-sccp.8-5-2 Appreciate if you can share the file here. Thank you.
Dears, We have recently purchased fee headsets for our customers. The issue us that the incoming calls are answered automatically when the user remove the headset from it's base. It impacting the caller experience. So is there anyway that I can disab...
| User | Count |
|---|---|
| 6 | |
| 6 | |
| 4 | |
| 2 | |
| 1 |
