IP Telephony and Phones

Hi,Trying to test SRST to a couple of 8961's [running sip8961.9-3-2-10] but they are stuck on "Phone Not Registering". The debug events show registration successful :-*Apr 19 13:35:15.911: VOICE_REG_POOL: Register request for (8000351) from (192.168....

Hi,i have CUCM 9.0.1.11010-1.I'm using the CCMUser web page to consult the directory, make calls via webdialer...My problem is that the page has a 30minutes timeout.Until version 8.6, the CLI command set webapp session timeout [m] solve this problem,...

Dear Community,My CUCME new SIP phones are restarting and re-registering in everything 5 minutes, SCCP phone are working fine. I have done all basic configuration required to register and activate SIP phones (CUBE config, Voice register global config...

I am trying to setup a translation-profile and apply it to a voice-port so I can route a particular FXS port out a particular FXO port. Is there any reason why a translation-profile shouldn't work on a voice-port in a UC500?voice translation-rule 1 ...

Hi Guys,Hope all are doing well.I've got an issue where the when the user puts the phone on Hold - it does not Beep after a few seconds. The configuration cluster wise for Hold Reversion Timer is set to 30 Sec.. and Hold Reversion Notification is Set...

Hi,I have CME 9.0 with 6921 IP phones, I have a problem when I set CFNA  ( call forwar no anwer) to external number, after the timeout the call is drop.is weird because I can set CFA to external number and CF busy to external number and both work fin...

Hi all,i have problem, can we have QRT button on Cisco 7937 ip conference phone or some other solution to find the quality of the conference callThanks & regardsIshaan  

Hello,     I am also having issues with the same Cisco 2821 CME system.  Some extensions are unable to get audio from calls coming off of a parallel hunt group.  This started with extension 1100 and 1101, but now 1102 is also affected.  I have been a...

I have used the command line command "file delete license" to delete a bac license file tac issued me.  After deleting the file I restarted the Cisco CallManager service.The counts are still showing up though when I go to System / Licensing / License...

Hello,Client is using Unity connection 8.6 and exchange 2010.  They have unified messageing single inbox configured.  One user is not getting their VM on in Outlook.  No changes have been made, but they ad rebooted their exchange server over the week...

Hello,     I am running into an issue with my CME/CUE configuration where whenever a caller tries dialing an extension during the AA announcement (or from the dial by extension menu option), they get a message (I'm guessing from CUE) that the subscri...

Hi,I would liket do seek everyone's assistance on my problem above. I have already tried solutions I found on the Cisco website and other sites. It was working before but we had to change the CUE hardware due to some sector issue as per Cisco. I have...

hello all,In our sysytem,we are facing one issue,ie calls are going in browser timeout VDN ,but we are  not  getting any logs(error) in cvp vxml applicationwe are using CVP7.how come calls will go in appication timeout without writing logs in servers...

Hi,There are two disks installed on the server and they are working RAID 1. So is it possible remove one disk before upgrading to new version of CCM, so if something goes wrong we can plug the disk and return to old version.CCM 6.1 - 7825-H3 bridge u...