IP Telephony and Phones

Hello people,I had succesfully configured MVA on a customer with CUCM 7.1.5, 2821 h323 VG with E1.It was working perfectly!! Suddenly they told me that it doesn't work..Here is what is happening:After they place the number they want to call, they jus...

I am writing a Unity Express script and I am trying to use the Switch String  object to process clls differnely based on what number was called.  I have tried using the Get Call Contact Info object to populate a variabnle with either the Called Numbe...

Hi All ,I  am facing a peculiar problem with my old pbx systems. I need some  helpfull suggestion from all. Well i have two karell pbx system which is  connected through h.323 Gateway (2901 cisco routers , version 15 ), all  gateway are locally conne...

Good Afternoon CSC,We are facing an issue on our Ireland VG where the time on the phone is 1 hour behind the time shown on the router. I have changed the time-zone to make it one hour ahead but still the phone shows the incorrect time. NTP is configu...

We are trying to connect Aastra 6737i phones to a Cisco 4507 switch.  The phone system has its own router connect to the Cisco switch and the router is also acting as the dhcp server for the phones.  The PC's will be plugged into the phones and will ...

Hello,I have built my lab at work and i am trying to figure out a way to use it while i am at home. Although i can access all the servers, routers and switches, i am unable to use the phone to make and recieve calls.I have tried to use a unified FX P...

Hi, I have a couple of Cisco CP-6941 that needs firmware upgraded from SCCP to SIP. I have a SEPMACADDRESS.cnf file in the TFTP directory that the phone reads after reboot. The problem I am running into is, even though I have correct loadinformation ...

My team was recently provided Cisco IP 7945 phones. We had been using Communicator on our laptops. I had purchased nice Plantronics noise suppression headsets for the PC that use a USB connector to the laptop. Does anyone know of an available adapter...

I have CUCM 7.1.2 using a H.323 gateway, Using an E&M card to communicate to the paging system.People are calling the number Paging, then not hanging up. Due to this, I would like to set a time limit for the call, then have it disconnect. Right now, ...

Hi Guys,Can anyone of you help me to understand if is there any way to record a inboind/outbound call in CUCM without exploring UCCX. is there any inbuild component available in CUCM or Unity connection which can used for recording call or the only w...

We had our SIP trunk connected to our CUCM 8.5 hacked into last month for two days before the phone carrier issues blocks to stop the calls.  When I look in CDR it shows only the calls as coming from an unknown but in a rapid fire format.  I did some...

IS IT POSSIBLE TO ADD AN IP PHONE DIRECTLY TO SUBSCRIBER ?

Hello Folks,I am trying to add admin user to "Standard CTI Allow Control Of Phones supporting Connected Xfer and conf" and for somereason i do not see this group on CUCM 7.0.1.Am i missing something ?I have pasted the output for the options i see.Any...

THE REPLICATION BETWEEN THE PUBLISHER AND SUBSCRIBER IS UNI-DIRECTIONAL OR BI-DIRECTIONAL PZ HELP ?