IP Telephony and Phones

Guyz i need to know if its possible to capture  RTP streams using G.722 with wireshark and play it ??? and if not can i like change the IP phone settings to another type of codec , im trying to do all this to find out if my voice traffic is encrypted...

Phone configured in CUCM as the correct defined type,DHCP Server option 150 points to the CISCO TFTP Server.Cisco TFTP Services is activated and running.The issues are as follows:(1) 16 phones - NOT showing any display after powering on via good know...

Does anyone know if there is a way for Unity Connection to just forward a message to Exchange w/o setting up Unified Messaging?  Airgas has CME now and that what it is currently doing.  I was hoping there was a light and easy way to set this up witho...

Should Mobility/SNR work if the primary phone associated with the User ID is a Cisco IP Communicator phone?

Hi,I have two sites with one CME installation each, and an integrated CUE on the second site (site B).If i´m doing a call from site A (7940 sccp phone) to the CUE via the CME of site B, i can´t get the DTMF tones through.If i configure a dial peer on...

Hi buddies.Someone already Record Calls with UCM 8.6 + IP Trade + Redbox Recorder?I configured SIP Trunk + Route Pattern + Recording Profile + Enable BIB + Disable Privacy + configurations in LINE, but just for IP Trade don't works.Have any special c...

When using the relay message option within Unity Connection, is there a way to append the caller's ANI to the message.  Using Unity Connection 7.1.5

Hi,CME version 7.1phone 7945when user use headset to answer call, they still can hear audio coming from handset.it is a quite in the office so my customer want to stop the audio from handset when they use headset,if it is possible to do that? ThanksB...

Hello Friends,I´m programming 2921 Cisco and translate rules, but calls can´t go from PSTN to internal numbering. My public numbers are 2414 83XX and 2414 84XX (2xE1 PRI ISDN). PSTN sends me last three digits (3XX and 4XX). My internal numbering is 6...

Hi,I have an IP telephony setup running on CME version 9.1.I tried to configure the EM on the IP Phones.CIPC is working fine with the EM.But when I tried to press in the globe button  in 7945 phone I am getting error like "No service Configured".The ...

Hi!We have a really big customer who, after the migration of the gateways to SIP and the implementation of IPCC - CVP, are experiencing the following issues:Sometimes, users cannot hear the first seconds of a call (they pickup the phone, silence, and...

Hey,I am trying to withold the caller for an extension. I am using cube and all the translation is done at the cube end also P-Asserted identity.How can i stop that extension from sending the caller id          Please rate the post Shibly Ibrahim