IP Telephony and Phones

Hello to all ,I have CUCM 8.6.2.22900-9 and 3 Cisco 8941 in 3 different sites . In the 3 sites the Route Group depends of a router with PVDM3 ( video capabilities ) , Cisco 3925 in 2 cases and Cisco 2921 in the other .The question is : when i Try to ...

I have a reoccuring issue with our Toshiba CIX 40 Phone System where extension to extension VoIP calls occasionally result in dead air (no speach path, just no sound/no voice/dead air heard on both sides upon connection of the call).  When the issue ...

Hi,I dont know if is possible to do global codec modification inside my CCME presently i believe the default isg711ulaw  which presently using. Can i do a global config to change this like to g729AB.Thanks

Hello everyone. i need to configure CUCM 8.6 with 60 analog lines. Is that possible to such a lot analog lines supported on CUCM? If possible, how can i add it on the server as a gateway. And how can i connect 60 analog lines to the voice gateway rou...

Hi,End user has CUE 7.1 with CME 8.6, some moths ago end user change credentials for CUE GUI, it  was working fine but yesterday the routerreload (it looks a power outage took place), after this when end user tries to access GUI of CUE to check exten...

Hi,Directory is synced to AD. When we built this off site in our lab we created a couple of test users. Now we are on site we have synced to AD and when we search the AD from a phone the test user still appears. When we search in CUCM End Users the u...

Hi,I m using tcl "its-CISCO.2.0.2.0.tcl" Cisco by default script. Script file is also attached. Right now its working but having 10 seconds delay after greeting till call transfer. I want to reduce that delay. kindly reply ASAP. its urgent, i have to...

I have a 7942G that I want to configure to vpn into a UC540. The problem I'm having is that when I go to Security Settings, and try to enable the VPN setting, it says that the Enable key is Not Active Here. So, I can't enable the VPN feature of the p...

how to setup voice mail account the massage never be delete .Thanks

Hi All,I would like to know if there's anyway we could count the calls that are blocked by translation-profile on Cisco IVS router which I assigned to ISDN-PRI Pots dial-peer.I come across the situation which need to count the number of calls which a...

Hello,For one of our customer we are going to do some services. Included in these services is a SIP connection to intercom systems.The destination of the intercom is 10.77.24.10/29 that is connected with a leased line to our office. On our office we ...

Hi guys,CME(9.5) IOS Version 15.3(2)TFirmware: 9971.9-2-2SR1-9When I tried to make a video call between two Cisco 9971 phone got busy tone in both way. I'm able to call between a Cisco 7942 and Cisco 9971 in both way so is confusing.I'm able to see t...