Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear all,I've established a sip trunk with ZTE MGW applianc but I'm receiving error everytime I use csim start for outbound calls,The errors are the following ( debug ccsip errors):Mar 26 17:41:47.467: //162/445401C08072/SIP/Error/sipSPIOutgoingCallS...
Hi ，Can I use AIR-PWRINJ4 for Cisco IP Phone 7975??????Thank you!
Hi, I am trying to config a Sip trunk on my router this is a Cisco Router 2801 with ios c2801-ipvoicek9-mz.124-25b.bin.My actual configuration is the following: dial-peer voice 9997 voip description Skype Incoming voice-class codec 1 session protocol...
I am trying to bring in an anlog PSTN line into a FXO port and extend that PSTN line to a local analog PBX from our FXS port. Any ideas as to how to accomplish this?
Hi,Customer has bought some new 7945s and suspects that this is going to cause some office jealousy as all the other phones are 7941/42 which don't have a coloured screen. Is it possible to get a copy of the monochrone background from Call Manager so...
Hi all,I have configured policy-map QoS and as I couldn't use it under tunnel interface, I configured parental policy-map QoS_Tunnel:policy-map QoS_Tunnel class class-default shape average 10000000 service-policy QoSIn policy-map QoS_Tunnel should ...
Today I got a problem with dspfarm on CUCME configuration “maximum session ?” it comes back <0-0> which means not enough dsp resources I know that but however I only allocated 3 dsp resources for E1 and the rest should be available for trancoder and ...
Hi,we have a customer with a 8.51 CUCM (8.5.1.13900-5) and all their 6941 phones are one hour ahead of time. All their 7900 phones have the correct time (Timezone Europe/Amsterdam). They only have one Date/Time group for the whole system. It looks li...
Hi Community,Hope every one is well...i am having a issue with couple of new cisco 7945 CCM 6.1....iam getting ip phone registration error with db config error....i have tried everythinhg cisco and guys on google recomended apart from reeboting sub a...
Hello to all , I need to create some translation patterns for emergency calls arround the country , the problem is I MUST use the same number ( 888 , for e.g ) for all the translations , just look :Rosario , disc 888 forward to 11441522Jujuy , disc ...
Hi,I have got a cisco 2811 router. Accidently I have erased the Flash file. Now when I reboot the router,the router does not get me anywhere.I am connected to it via the console and all I get on the screen is a few funny characters?If anyone can help...
Hello guys!I am experiencing the following behaviour with a CUCM 9.1.1a routing calls to PSTN through a h323 gateway Cisco 2921: The CUCM has a route group for Route Patterns with first option a SIP Trunk on the gateway and as seco...
We're running UCCX 7.0 (1)SR02_Build099. Roughly a week ago our end users reported they were unable to login to CAD. Upon checking the servers the event viewer was showing several error messages as below... Event Type: Information Event Source: LDAPM...
Hi,Need help on how to interpret the IOS of CME. Currently, the Cisco 3925 is ruuning CME version 9. However, I am lost to understand the IOS version:IOS Version: 15.2(0.13.4)PIA17In Cisco's website, it says that the CME version 9 should have an IOS ...
I Guys,I read any documentations, but, not stayed clear for me if the IP 7940/7960 with SCCP accept or no encryption. If not accept, is there any documentation?Thanks,Wilson
| User | Count |
|---|---|
| 7 | |
| 5 | |
| 4 | |
| 2 | |
| 1 |
