IP Telephony and Phones

Dear Team,On CUCM 9.1.on Sip phone 8961, when i take handset to make a call, but the led on only about 1 second. I have not enough time to press number dial.while, on sccp phone 8945, i take handset, press number and make a call normal.Please help me...

Dears,I had CUCM v7.1.5 and i upgraded it to CUCM v9.1.1after the upgrade i cant access the sever GUI, i got this message""HTTP Status 404 - /elm-admin""Please help ASAP.BR,Haytham

Hi Team,We have Cisco Call Manager Express which is using some extension range and we have CCM server which is handling another extension range.We will be slowly migrating all the CME phone to CCM. But currently. both CME and CCM are operational. Iss...

Dears,I have Unity sevrer v 7.0 and i need to upgrade to cisco unity connection v 9.1.I used the COBRAS Export tool to take a backup but i got thiserror""currently logged in user is not associated with the AvcMgr service""Please advise.Best Regards,H...

Hi all, I'm doing a desing.We have two networks, with one CUCM Cluster in each network, these networks are of different customer.We have some duplicate subnet ip phones, we suggest install a CUBE between the two networks, with the purpose to make add...

    Has anyone done an integration with callmanager express.  Problem I am running into is the customer wants a beep to indicate the call is being recorded. I understand that under straight callmanager with the sip trunk and profiles but not with cal...

Dear All,I have a centralized CUCM cluster running 8.5 and have plenty of remote sites.Now I would like to have Automated Attendant  feature to be deployed at one of the remote site.AA should play basic greetings like welcome to XYZ , press1 for sale...

Dears,I want to verify my route pattern whether the route patten i have configured are correct or wrong ,,at present my PRI is down before going live i want to be confirm my route pattern on  CUCM  and dial-peer on voice gateway are correct.what tool...

I am running a 2951 voice gateway with the 15.1(2)T5 IOS code.There is a way to add the 6945 as a custom built ephone type. Once built it will work. Does anyone know exactly what info is required after you define it using:ephone-type 6945   command?A...

Dear All,I am running cucm 8.5 and cisco unity connection 8.6.I have successfully integrated cucm and connection.and when i dial the voice mail pilot number lets suppose in my case its 4000i can hear the voice mail prompt message. "welcome to cisco u...

Hi ,I'm trying to register 8945 with CME 9.1 however unsuccessfully. The phone keeps display "Phone not registered". I've tried to upgrade phone firmware to 9.1 by:tftp-server flash1:8945/SCCP894x.9-2-2-0.loads alias SCCP894x.9-2-2-0.loadstftp-server...

Is it possible to retrieve the phone certificate from the phone physically?