Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Considering the figure below, my question is: Is it possible to filter a few number of calls to CUCM and bypass all others to PBX E1 0/1/0 ?dial-peer voice 25295029 POTSdescription inbound call for phone 25295029incoming called-number 25295029destin...
Hi all,We have a problem in adding 7915 expansion module into CUCM Business Edition version 6.1.1.2000, we didn't find this device type in "Device Defaults Information". Do I need to install a CUCM device package to resolve this issue ? if so, is the...
Hello,In our environment we have two subscriber servers connected to two different core switches. Every subscriber server is dual NIC and we have performed teaming on them such that one NIC is connected to one core switch and other NIC to other core ...
If an H.323 gateway directs calls to the failed (out-of-service) primary Cisco CallManager server, it needs a way to redirect the call to the secondary Cisco CallManager server.Is there a scenario that works for PSTN-phone-to-IP-phone communications?...
Hi All,Currently using a cisco router as my SIP GW. My hope is to use this router as my sip trunk to my provider. When i call the number assigned to the gw im getting the following two entries in the debug. //12/0E601AFD8035/SIP/Error/sipSPI_ipip_c...
HiI have an issue with call volume on 3905 being extremely low. Is there any way of increasing the volume of the handsets beside the volume up and down keys on the phone. All the phone volumes are at maximum but the volume is very low. We using CUCM ...
Dear Team, How to Change of Caller ID to callers number while doing call forward.?At present it is showing call forwarders number.Best Regards,
Hi Everyone,I was wondering if anyone has seen this before. One of our customer has an ISDN BRI on an MGCP gateway and connected to CUCM. They report that when they try to make a call it doesn't always go through, i.e. they have to try a few times be...
Hi,I have Cisco IP Phone 7965 and CCME Router 3945 with Cisco Unified Communications Manager Express 8.6. Currently our PABX operator is using TWO 7906 IP Phones for two receive incomming call from different lines in following manner :ephone-dn 1 dua...
Hi Folks,I'm tryning to troubleshoot an voip call issus between CUCM 8.6 and UC520 and I think I need some help.There is a gatekeeper and CUCM 8.6 is already working fine with several other gateways. The issue appears when I try to call a UC520, that...
I am currently CCNA certified and am working on voice with the view to taking certification this year. I have setup a test CUCME 7.1 environment with a mixture of 7900 series phones. The system is based on a 2821 router with aim-cue. I have a working...
Hi Need qick help,MWI is not working in CME,he re the configuration of the CME and CUECUE CONFIGNM220CUE# sh running-configGenerating configuration:clock timezone America/Los_Angeleshostname NM220CUEline consolesystem language pref...
Is there a way to save the call history on the voice gateway logs like:Called NumberCalling NumberVoice PortRegardsLeonardo Santana
Is it possible to install a stand-alone copy of ELM for the sole purpose of monitoring license usage in an 8.6 UC environment? Meaning, no 9.X anywhere (at least for a few months)?What would prevent this scenario from working properly?Thanks!
CUWL PRO includes WebEx Meeting Centre in the options available. Does this mean you can launch a WebEx session directly from your Cisco Jabber for Windows? OR it simply means you get access to a WebEx account that is not in anyway linked to the UC sy...
