Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am trying to burn my .iso for CUCM 8.6.2 (file name UCSInstall_UCOS_8.6.2.22900-9.sgn.iso) to a DVD. However, Roxio is telling me that my image is 100 MB over the limit. Simply put, (screenshot below) the image is only slightly too big for the stan...
Hi Everyone,I just recover my CUCM after my CUCM can boot into system.I have done all the instructions that cisco gave in this url http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080b1f305.shtmlOne thing i want to ask af...
Hi all. Hopefully this is an easy one. I don't yet setup or install IP PBX's oranything however I will probably do so sometime next year . Meanwhile, I'd like to replace my desk phone. I figure if it's possible, I'd like to pick an IP phone, 2 lin...
Hi Folks,We have recently upgraed our CUCM to 8.6.2 from 8.0 and we are having an issue with a number of phones where the Missed/Received calls directory is not availble any longer. Also, when users try to use extension mobility they are getting a 'h...
Hello,Is there any trap or SNMP MIB if an endpoint unregister from the CUCM ?Thank you
Hi there I am trying to get a handle on how the MeetMe works. We have the following entry on our CME systemdspfarm profile 1 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 4 confe...
While Checking the configuration of E1/T1 as WAN, I have seen the command: ''channel-group''. Is it for CAS? Can't we use CCS for this configuration?Any help would be appreciated.
Trying to get a VG204 to register with CM and was always rejected. Changed in CM to VG202 and it came right up. Is there sinething missing in the CM?
Hi,I have configured transcoder in voice gateway and it is registered in CUCM. and the transcoder is not applied IN MRG and MRGL and DP applied in CTI route point. WAN side we are using G.729 and UXXC is using G.711call flow is,cluster A ---- ICT tru...
When blind transferring to a cell phone I would like for the caller ID of the PSTN call being transferred to show. Right now the caller ID on the cell phone that the call is transferred to shows the facilities number not the originating calling numb...
Hello,I have CUCM 4 servers in one cluster. SrvPub, Srv2, Srv3, Srv4. Srv 1 is the publisher.I've configured the CM-Group for 3 severs. eg {Srv2, SrvPub, Srv3} and {Srv4, Srv3, SrvPub}If I browse on the publisher, then I cannot see the phone if they ...
Hello All, I tried to find it in existing support fourms however couldn't find it. I am facing an issue with Call park and Hold when using CUEAC.My question is when a call is parked or placed on hold using CUEAC client installed in the PC at some rem...
HelloI am looking at a CUCM 8.0.3.21900-8 cluster with about 5500 79x5 phones, all of which use Extension Mobility. Auto-logout after 12 hours is enabled, so users have to login to their phones every day. The cluster is not linked to Active Directo...
Hi Guys!Am currently studying CCNA voice. I hope to dive into CCNP voice next month with a maximum of 2 months between exams. Am trying to come up with my personal schedule and would love to hear how others study ( considering the fact that you have ...
Hi Guys!Why are the phones not generating SEP files? This is what they are generating 123 0 Aug 23 2012 21:48:18 +06:00 its/vrf1124 61 Aug 23 2012 21:48:36 +06:00 its/SEPDEFAULT.cnf125 3304 Aug 23 2012 21:48:36 +06:00 its/vrf1/...
| User | Count |
|---|---|
| 6 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
