IP Telephony and Phones

Hi,One of our customer has CUCM 8.6.2 Pub and Sub in Head Office, Remote branches are connected to the CUCM cluster using cisco router 2921 as H.323 and equipped with 8FXO ports and CUE module 8.5.1 connected as JTAPI on CUCM. Now the scenario is tha...

Good Afternoon Everyone!I'm running into a strange problem when a client attempts ad hoc conference calls.If the client is dialing a third party when attempting to initiate an ad hoc conference, if he hits the conference button prior to the called pa...

So my expeirence is primarily with FXO ports. Does anyone know of diagrams that show the inbound call flow through a PRI? Or possibly step by step documentatiojn on setting up a PRI?I understand how to setup the interface for the PRI. What I don't un...

This is more from an managerial view. We have one IPCC and 1 CallManager. We are looking to add additional CallManger (for the obvious reasons). Currently these are physical. With a small environment such as this, is it best to remain physical or go ...

Is there a way to disable the beeps that other users will hear on the phone if you put them on hold?  During conference calls with multiple people, when one of them puts their phone on hold, everyone else hears a series of beeps every 10 seconds.  I ...

Dear Networkers,After installing a single server of CUCM v9, how much DLU and Node licence per default we can get ? and are those licences permanent or just demo for some period of time ?Thanks in advance.

I am trying to verify if what I read was true. I would LOVE to setup local route groups in cucm with the new cluster I am building up. It sounded great with the simplified dial plan and all, until I kept reading about forwarding. When I read about us...

I understand that My Phone Apps for SIP IP phones was added in CME v9.  We have an end-user who has just added a 8961 to CME v9.1 and they report that they cannot amend Fastdials & Speed-dials from this endpoint (which should be under My Phone Apps, ...

Hi,we have one setup of CUCM 4.x with 1200 Phones with XXXX numbering schema. Now we have another setup of CUCM 8.x with 5000 Phones with XXXXX numbring schema.Is it possible to interconnect both the setup and trasfer call between the CUCM?main Issue...

hi all,i am trying to configure the lunch brake,after hoursand holiday shedules in cisco unity connections 8.6.2,but failed.i searched a lot but couldnot find proper document for that.when i cam configuring closed hours greeting in same call handler ...