Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear AllI face the 7970 IP Phone bricked problem after power on as below detail.- Screen of IP Phone not display anything and it seem like no power feed to screen- The green light run from the first "line button" to the last as sequential and also re...
Scenario:Home lab setup. Site A has a CUCM (CUCM V. 8.6) cluster with 2 servers running on ESXi virtual machines. It has one 3825 router with IOS 12.x, and 2 T1 interfaces.Site B has a CME router (ISR 2911, IOS 15.x) and 2 T1 interfaces.Routers in Si...
I need to upgrade one of the 7945 ip phone to have SIP firmware instead of SCCP.Currently this phone has SCCP45.8-3-5S firmware. But when I looked at the “Device Defaults Configuration” in UCM, we have the option for SIP Protocol. The firmware is c...
Probably a simple question, but new to this. Router currently has NM-CUE & VWIC 1MFT-T1 modules (previous owner used T1 for trunking). Current owner can only use analog trunks (4 needed) due to location.Seems that an NM-HDA would be needed with an EM...
Hi,I am facing a problem with regards to voicemail file.when i recevied the voicemail from voicemail server in outlook i am able to play it via viewmail installed on the system, when i am save the voicemessage file on the local system then i am not a...
Dear AllI have configured Microsoft Lync Clients and integrated with Cisco CUCM. All the Local extensions call landing to Lync Client. But when somebody calling from outside so its not landing to Lync Clinet. Can anybody suggest what i have to do for...
Hello,I've the problem in some phone (with different model ) . Some phones device dosen't log the missed calls. The version of the CUCM is 8.6.2.22900-9 .what can I do?thanks a lot .Roberto
Hi All,I have configured a VG202 gateway using MGCP on my CUCM version 8.5.I have also configured a Analog port which shows as registered on my CUCM.However, I am getting no dialtone on the analog phone I have plugged in on the FX 0/0 port.When I cal...
Has anyone had any success getting ANVEO to work with a 2851 CME router? Here is the info Anveo provided for me to use:Username: 5551112222Passwordabc123 SIP Registration Servers/Proxy: sip.anveo.com:5010 (USA) sip.ca.a...
Any idea where I can download TCL script app-faxmail-onramplink posted on docs "Configuring T.37 Store-and-Forward Fax"seems to be dead, folowing link in docs goes to the download navigatorhere is the linkhttp://www.cisco.com/pcgi-bin/tablebuild.pl/t...
Hi all,I have a Cisco Unity Express that have actually 8 ports, our Branch office grew up so we want The cue to catch more calls, but not buying anything for now.This is what I have:mail> show hardwaremail uptime is 2 weeks, 1 days, 0 hours, 14 minu...
Hi!I would like to ask how do I know the different lines in different SIP servers to register?/tftp_root/SEP010203040506.cnf.xml :---<callManagerGroup><name>Default</name><tftpDefault>true</tftpDefault><members><member priority="0"><callManager><nam...
Hi,How can we block access to Pagging DN for any calls which comes in from the CO line.i have the following Pagging DN configured.!!ephone-dn 10 number 1111 name Paging - XYZ paging ip 239.1.1.1 port 2000!now the issue we facing is any calls which ...
I install gas correctors with modems that have traditionally communicated over a POTS line. With most businesses going voip we are having difficulty communicating with devices even with the cisco 186 & 187 ATA boxes. The apparent problem is low...
Hello All -I have been deploying CuciLync in a lab environment (CuciLync 8.6, CUCM 8.x) before a client deployment. I have everything working quite well, except for one thing:The primary reason for deploying CuciLync is for presence change in Lync o...
