IP Telephony and Phones

Cisco 7925 Wireless IP Phone and Aruba Access Point

Hello EveryOne,Is it possible to use Aruba Access Point with  Cisco Wireless 7925 IP phone? If so can any one provide me techinical Documnet.

Cisco 7945 as landline phone

Hi,I m trying to convert my Cisco ip phone 7945 as emergency phone in case my cisco servers break again. Is it possible to use 7945 phone without CUCM and voice gateway at all and just attach it to seperate pstn network r? probably not?

CUCM Restrict User Access base on Phone

Hi all,I have one Cisco CUCM cluster for Mainsite and a branch site. So, I want to restrict privilege for  administrators in branch. The administrator in branch just only have the privilege to access to IP phones which are in the branch site.Any idea...

High packet loss while accessing Cisco Unity Connection 8.0

Hi All Networkers,This is Niran.  I've installed Cisco Unity Connection 8.0 on VMwareworkstation (72 gb & 2gb ram, Bridged). I'm getting high packet loss while pinging the CUC and takes long time to load the web session.Here is the ping response : Re...

CUCM Upgrade from 6.1.4 to 8.6.2 on UCS

Although 6.1.4 on UCS is not supported . I have installed the 6.1.4 and i am planning to upgrade to 8.6.2 on UCS . But i am getting an errorI have checked all the prerequiste for 8.6.2 on UCS and have made it according to the ova template . Even thou...

CUBE SIP to SIP full E.164 ANI

Border Element to SIP Trunk

I have a few questions about setting up a CUBE to connect a Call Manager enviornment to a SIP Trunk ITSP.We are going to use a Cisco 2821 router.  I have purchased the "Grow as you go" license packs in a 100 and a 25 user quantity.1) I've installed P...

Does anybody use Sprint SIP trunks as an ITSP?

I'm trying to find someone with experience configuring Call Manager to use a Sprint SIP trunk.  I need to confirm a few things.1) Do we have to connect to their SIP trunks over their MPLS network?      a) If not, what are the pro's and con's to using...

Cisco Agent Desktop - Login issue

I have one user that just cannot login to CAD.  We get the error message:  "The ID you entered was not found"In the log, we see:  "ERROR DAGT3010 Error: get agent returned: <Could not find specified entry.>,."The only information I find on this error...

Losing connectivity to PC's behind 7945

I have some 7945's that register to CUCM 8.5.x.The reg fine and pc behind commicates without issue. Strange thing is after a certain amount of time, the PC seems to lose connectivity after a few hours or few days.The PC was and is fine without the 79...

CUCM 8.5 AD Sync both numbers

Is it possible to sync both ipphone and telephonenumber AD fields to DC directory? Customer wants to display both e164 and extension number in phone directory. Do not want to create dummy AD user per real one .Sent from Cisco Technical Support iPhon...