Hi everybody,There's a customer that has a cisco 2921 router (Version 15.2(2)T //// "flash:c2900-universalk9-mz.SPA.152-2.T.bin").It has two FXO ports with phone lines: 1348 and 1074.1/0/12 -- fxo-ls up dorm idle on-hook y 1/0...
Hello,does any have something like a sample script or a link with some easy to read documentation on generating a Unity Express AA script? Something basic like "Thank you for calling. Press 1 for sales, 2 for customer service" blah blah blah.Some...
Hi there, I am configuring an ISDN fractional 10 for one of our branch office. my understanding is that for B channel, Cisco IOS default is in descending order, same as the Telstra the provider, to avoid confliction with Telco, we should pla...
What Voice Interface Card is Needed in Cisco 2911/K9 Router to make Voip Call Outside Network. Internet connection is coming in router though ADSL card interface in this router. IP Phones Phones are registered in the network to make call internally b...
Our company has a dozen phones with RingCentral and I am considering purchasing our own system as I understand it should be cost effective in the long run. We own our IP phones that we use with RingCentral and they are Cisco, so I thought it would m...
I have a simple setup where the incoming main office number is translated to ext 200. Extension 200 is the Pilot number for the Hunt Group and I also have ext 200 assigned to a DN that is assigned to the main office phone along with ext 100; that way...
Hello,Is it possible to have two different tftp servers in my network?1st tftp-server for IP Phones configuration files2nd tftp-serverfor IP Phone firmware loadsThank youDimitris
Hello,I configured CUCM to generate and export CDR but he is only exporting CMR to the FTP serverAll services of CDR are runningThere is only one server running CUCM.‘CDR Enabled Flag’ to TrueCDR Load Schedule is enabledRegardsLeonardo Santana
[I hope I got the right forum area]We use a mitel 3300 PBX for all our VoIP, across mostly procurve equipment, but Cisco too. All runs great, except at our biggest branch office, which connects via a 100mb metro-E. The telco hands this metro-E to u...
Hi all,I have a problem with my Call manager 6.1.2.After a loss of energy the server comes up but some services didnt start.Here the list.admin:utils service list pageRequesting service status, please wait...System SSH [STARTED]Cluster Manager [START...
Hi,I'm working on a worldwide design and just have a question on maximum latency between remote locations (with phones and Voice GW) and CUCM that will be placed in Data Center. Do you have figures on this point? I can't find it in SRND.Many thanks f...
Hi there,We have Cucm 8.5 over several sites using local gateways to PSTN calls. On a gateway connected to CUCM over a SIP trunk and then connected to provider through another SIP trunk, we get an initial delay of 0.5 - 2s on an outbound call (usuall...
HI,I am applying an ldap filter in Cisco CCM 8.5 to filter record whoes ipphone field contain null valeI apply below mention filter and still its not working(&(objectclass=user)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2)...
Hopefully this is an easy one for you all. A customer has a need to forward VMs received on one DN to be picked up at another. If copies can be left in both mailboxes that would be nice, but is not a requirement. We are running Unity v4, and CUCM v6....
Hi,Guys.Recently I have connected a GSM Gateway so that I can make mobile calls using it.But, there is something strange that happens.When people from the outside call to my mobile number (that I have configured connection plar to the receptionist) I...
