IP Telephony and Phones

Hello,I recently upgraded the software on a VG248 to 1.3(2)ES2 and now calls on a analog push button elevator phone wont work. It calls fine but when other end user hangs up does not disconnect and you hear a fast busy. It disconnects with previous s...

Is there a minimum IOS version for a VG224 to be supported with CUCM 8.6?

                   Can anyone help in providing the information?How long the phone will register in SRST mode afetr the WAN outage. will take the scenerio as the phone is in SRST mode and the WAN is  not come up.Example: If u take avaya the phone wil...

How will someone know if the switch port is running Cisco Inline Power or IEEE 802.3af? Is there a show command which could provide this detail?Thanks!

Hi everyone,I have a geographically separated user attempting to use the callback softkey on a 7942 phone. The feature is not working and another technician stated that it is not supported on CUCME and used this as a reference:http://www.cisco.com/en...

HiI have a CME setup for a hunt group.I created a hunt group to ring 2 phone A and B simultaneously for 30 seconds then failover to an offnet number.Under ephone configuration for phone A I have call-forward noan 10 7000. If anyone rings phone A afte...

Hi,I got delivered a MCS7845I3-K9-CMC2 with CUCM 7.1.5 software. Already when installing from the delivered DVD, the installation stops early in the process saying:      Hardware Configuration Error       IBM ASU [Error]: could not setup with inpu "/...

Cisco Forum:I powered up a Cisco C200 server and have good CIMC IP connectivity (ping responses and web admin access).  However, I loaded VMware ESXi 5.0.0 but can't ping to it.  It's as if the C200 Ethernet Ports don't function.  Switch connectivity...

How to configure Conference in CUBE Give sample configurtion

Hi out there.I got a problem with KPML.I got an CME where KPML just works fine and an CUCM 7.1.x where it doesn't.The only difference i found was in the cnf.xml for example:An working CME phone config contains <kpml>1</kpml>where an CUCM phone config...

I need change forward all CSS option in line page. its for 150 phonesIs it possible to do in BAT                  

Hi, I just received 230 Cisco 6921 phones. when I add phone to network it auto register but in applications there is no Extension Mobility so users can't login.If I go to device->phone select auto register phone(just added) and mark checkbox Enable E...

Hello All;In our one of the remote site ,which we did call manager upgradation from 8.3 to 8.5.After upgration we noticed the following problems.We are using  extension mobility service in the entire sites.1.Auto registration is not occuring by defau...

Hey AllOn the weekend we completed an upgrade from CUCM 8.0.2 to CUCM 8.6, the upgrade went ok however this morning we have noticed that the URL directories for the 7945 phones are not updating for example the missed calls directory. The phone shows ...