IP Telephony and Phones

In my company there are two buildings on the same LAN. We have two types of Cisco Ip phones 7965 and 6941.In the first building both types of phones are working fine, but problem is in the second building IP phone 7965 call logs (missed, place, recei...

Hi All,Just one small query, can i use the same prefrence number in dial peer voip and another dial peer pots.for e.g.dial-peer voice 1 potspreference 1  destination-pattern [7-9].........no digit-stripport 0/0/0:15!dial-peer voice 4 potspreference 2...

I configured my Cisco IP Phone 7906 to work with asterisk using SIP protocol.The display just shows “Registering” message and stays for a while.I am apple to make outgoing calls but when dialing the phone extension, I get busy tone.Any idea where cou...

I am having an issue with CER.Customer wants to dial  911 not 9.911. For all other calls the need to dial "9". The way it is know you dial "9" and no dial tone . The   Calls are going out but customer wants secondary dial tone after you dial "9"Any I...

Hello Friends,I´m working with CUCM. Last friday incoming calls don´t work in gateway 2921, however out calls and internal calls don´t have problem. Principal number is 756 2300. Exist translation rules into 2921 and CUCM, this is 6300.Do you think p...

Hi,Does Unity Connection server itself have the ability to do the voice to text translation? Or In any and every scenario it depends on nuance? How we achieve connectivity with nuance (external to the org)?Thanks,

Greetings, an IP 7971G phone was transfered from 1 site (CUCM 6.1) to another site (CUCM 8.6) and registered fine.  However, the firmware on the 7971G remained as TERM71.DEFAULT.  The expected firmware upgrade to the default load for 7971G on the CUC...

I have 2 VWIC cards in gateway, one has no T1 connection, the other does have an active T1.  Can I remove the unused card without having to power down the gateway?If I have to power off, is there anything I have to do prior to powering it off (cli co...