Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We have a CUCM routing external calls out through a Cisco IOS H.323 gateway to an ITSP, using SIP for the onward connections. We are using rtp-nte relay for the dtmf tones and these function on 99% of remote IVR menu systems etc.We have some remote ...
Can anyone assist, I have a call manager express version 8.6 IOS 15.1.4T and i am trying to connect directly to a Gamma provided SIP gateway in the UK. The config looks ok, debugs indicate calls hitting our router but dont get any ...
I am having an odd problem. Ever since upgrading my CallManger cluster to 8.6, overseas calls (IE, to Australia) have only one way audio from the IP communicator. The caller, running the IP Communicator can hear the other party, but the other party c...
I have problem with IP Phone 6901 , I got status DECEASED instead of REGISTERED.I searched @cisco Forum and I got answer to remove ephone and reconfigure it again , I did that but the IP Phone disappear after that.Now when I do #Show ephone 6901 , ot...
I am having an issue with call fowarding a shared line to another extension. Extension x3044 is on 4 different phones as a shared line with the same settings on each phone for this line. Currently I have an extension (3044) set to foward to (1123) on...
Greetings,Running a Cisco Unified Business Edition (CUBE) 7.1.3. Been asked to create a new menu for the operator message. All the requests are straight forward except for one which is to hit button 5, and have a message played giving directions to...
I have CUCM8.6 and after the IP Phones registered I can't find the Ip phones in the Corporate Directory .Which Config Should I do to see the IP Phones there ?
Hello everyone, we're currently expiriencing issue with multiple sip registrations from one device.Our setup is:- CUCM 8.6 on VMware ESXi server- FXS gateway with 24 analog ports.In order to connect gateway to CUCM we created 24 third-party SIP phone...
Hello,I'm trying to use Calltracer 7.2.0 (http://www.myvoipsource.org/open-source-tools/calltracer/) with a CUCM 7.1.I have followed the "readme" file to configure it, but it seems it doesn't work...Has anyone used this software successfully and can ...
All,If I migrate my UC virtual machine infrastructure (CUCM 8.6, CUC 8.6) to new hardware at what point will I be prompted to get an updated license? I just did this for the 2nd subscriber in a cluster and it did not say anything about requiring a n...
I just enabled the LDAP sync on my CallManager 8.6 server and I'd like to set up a filter to not sync any account that has the telephoneNumber field blank. Would (telephoneNumber! ) be correct?
Hello,using the setup in the title is there any way to have a DN where external calls have a silent ring but internal calls from other DNs actually ring? If not possible on CME then how about on Communication Manager?Thanks and I rate replies. ...
We have CUCM 8.6 and two providers: AT&T and Paetec. Paetec is local and LD. AT&T is international and has CLID blocked. Normally our users use access code 9 to make a call and it goes out the approriate connection. If a caller needs to force CLID bl...
When we talked about the type of the gateway (as endpoint) that can register with cisco gatekeeper, the gateway can be register as one of the following typesVOIP-GWH323-GWTERMENALbelow the output of the command sh gatekeeper endpointMy question here ...
I have a meetme conference that someone placed on hold. Is there a way to kill just the one conference without effecting all conferencing at the site?We are running Call Manager 7.1.5Thanks Jason
