Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hello, I am looking for some information about changing the font size for the 8851 screen. Looking at the 8851 user manual (https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/user-guide/P881_BK_C3A802A0_00_cisco-ip-phone...
Hi Guys, Hey just an stupid question, have you heard when CUCM 14 will be released? Cant wait for a lot of bugs to be fixed. Thank you very much.Juan.
Cube local gateway with pstn contains did numbers, webex works with email addresses, when we register the cube with webex cloud, how the pstn will dial cloud users? Will there be extension numbers for webex users? If a webex user is in a remote a...
Hi,Can we from IP phone, login(Hunt Log) to different huntgroups.We see now only one huntgroup what we can login.Directory number is configured in two huntgroups.
I’m sure someone will understand me.I have two 8821’s and currently two access points specifically for the 8821s only. They are connected to a WLAN controller. What I notice is calls will be dropped and not seamless when in the vicinity of a stronger...
Hi All,We recently installed a few Cisco 7975 IP phones in one of our remote offices. The setup has one Mikrotik router as gateway and IPSec endpoint. We have a CUCME router in our main office and phones in remote office connect to it through IPSec t...
Dear Team, Am facing an issue related to out going call over SIP Line. I have SIP Trunk configured on our CUCM and the ISP Allowed range of SIP Direct line 7720 to 7730. [30 Extension]When we place the call from the extension number which fall in tha...
Hello, We recently added a CUCM subscriber server to CUCM cluster. The cluster initially had only publisher and this is the first subscriber server. After joining the subscriber server to the cluster we have noticed that all the phones that were in "...
Dear All, We have upgraded CUCM version 11.0 to 12.5.1. Post upgrade CUCM vCPU is mismatch b/w ESXI and CLI.when I log into the CUCM, the CLI displays a different value for vCPU, and show hardware Please advice.Ram.S
We are integrating our CUCM with Expressway and we want to restart tomcat services on CUCM.We have lot of Jabber users with SSO enabled. So, want to make sure, if it is going to affect any users after tomcat restart.I know we can disable SSO, restart...
Hello, Hopefully a simple question but I can't find any good documentation on the use of sip-ua timers with in the CUBE config and wondered if anyone had the answer please. With regards to the following timers sip-ua retry response 3 timers connec...
Hi, Can you please inform that how can i configure conference setup in our Call Manager Express 10.5 We have SCCP & SIP phones and required conference setup Waiting for your earliest replies will be highly appreciated Thank you Sajid
Hello, I wanted to update name and label of the Cisco 7821 as per commands below.voice register dn 9number 7065allow watchname AdamSlabel label AdamS-7065 I have restarted the voice register 9.CCME-01(config)#voice register pool 9CCME-01(config-regis...
Hi, In the last few days I'm having an issue with digit by digit dials - for example: when I press the "speaker" button and then dial (digit by digit), the call will not go out (nothing happens), however when I first press the number (block of numbe...
I have IP Communicator 8.6.2.0 installed on several users pc's. When depressing one of the keypad keys on the keyboard or via mouse input there is only a Mono tone generated and not DTMF. I have been searching but can only seem t...
