Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I noticed that my swap partitions on CUCM servers is now at 0% after upgrading to 8.6(2a)SU1. I checked some old records, and on average it used to be at about 55% on all servers. Is this normal?Thanks,Josh
Hi All,We have deployed the CUCM 8.6 in UCS 210 M2 Server.We faced the problem VM got to hung state.There is reponse when we tried to login via WEB & CLI.We tried to restart the UCS server using Esxi console , it didn't respond.Finally we reboot the ...
Hello,I've got this MCU 3515 unit with following software versions:Software: 5.5.3.0.14EMP: 5.5.3.0.4MCU: 5.5.3.0.5Successfuly integrated with CUCM 6.1 and used as hardware conference bridge.SCCP service was enabled and configured. No problems here: ...
Hey guys,We are in the process of setting up a point to point connection to our Colo datacenter. We are working with a couple of providers and the question that we have is regarding the ISP's QoS capabilities. If our voice traffic traverses the...
Hello guys! When adding a Subscriber server to an existing Publisher in order to create a cluster in the Cisco Communication Manager existing group in the Administration page, if the Subscriber is first in the CUCM group in orde...
Hi,I have Cisco Router 3945 with carts E1 and FXO. The version IOS is: c3900-universalk9-mz.SPA.152-2.T1.binThe communication through E1 passed well without any problem. But I have some problem with FXO communication.The problem that I have actually,...
I converted to a Mac and was hoping all my troubleshooting tools would work in the new environment. Unfortunately when I try to start IP Communicator I get a message "Default Windows Audio Device is either missing or not connected properly. Please r...
i got a problem (ICT Non-Gatekeeper Controlled between CUCM 8.6 and CUCM 4.2)! fast busy tone after the called party pick up the phone.
Hi All!I have the same issue that John Gross had in 2011. Unfortunately, the answer given did not help me. The caller id displays as unknown. This was the issue he had :https://supportforums.cisco.com/thread/2120778This was my configuration to start ...
Hi,I have CUCM 8.6, and I have installed Cisco Jabber on my cellphone. It works fine when I dial numbers without +,but when I try to dial number from my directory that starts with +, it fails. I am using H.323 protocol on gateway.Does anyone know wha...
Hi, I am trying to understand whether it's possible to initiate a conference from a SIP softphone configured as an extension of Cisco Call Manager. As far as I understood from the documentation that I found on Cisco website, it's possible to initiate...
Hallo to all,I have a problem to register Aastra 4425 IP phone on CUCM 6.1. Does anyone has experiances about it? It can works in SIP or H.323. I have registered Aastra 4425 to work with CUCME.Best regards,Beri
Here is the breakdown:We are running CallManager 4.3(2)We have multiple clusters connected to a gatekeeper using H225 Gatekeeper controlled trunks.Calls between clusters are working fine except for one group of phonesThese phones are remote site to t...
Hi All,Is there a way to download the old and new voicemail file of the user from unity express?Regards,Pawan Arora
Dear All ,We had a new Voice Gatway router C3945-CME-SRST/K9 for our new branch ,I did basic configuration like configuring Gatway ,configuring Dial Peer .can any one provide me the steps for Configuring Voice Gateway .Thanks.,Mubarak Ali
