Hello AllI have Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.5(3)M7, RELEASE SOFTWARE (fc1) with CME version 10.5. Can I upgrade CME to version 12.X - 14.X?
Hi Guys I just implemented a voice gateway, for outgoing calls there is no problem.But when I try to reject it doesn't get cut off but still "beep beep beep" as if it's still ringing. (I tried to call out to my personal cellphone then I refused (Reje...
I have a UCS-160D-M1/K9 unit mounted on a 4451 router that keeps shutting own once it fully boots up my VMWare ESXi. I don't get any error messages and there's nothing in any logs at all... I've gone through and checked to make sure all the hardware ...
Hi, Need assistance on regenerating CUCM 10.5 security certificates. Most of the certificates are expired. Please suggest best steps to regenerate. Please see the attached notepad. CertificateSort Common Name Type Distribution Issued By Expiration De...
Dear Community, Setup: Cisco 3pcc Phones on an asterisk Server are setup to access an external trunk by dialing "0" as prefix.e.g.: To dial an external number as 012345 it has to be entered as "0012345" by the phone users. The phone's call list shows...
dearswe set trunk between cucm 12.5 and yeaster pbxwhen call from cucm ext the yeaster EXT. ring but we cant hear uswhen yeater try to call cucm receive MSG not foundcan any one help me.
Hi, I have the following:ISR4331 - 100 phones SRST capacityVG450 - 144 SCCP configured for analog basic phones40 x Cisco 8851We configured all 8851 in a device pool with ISR4331 as SRST reference. We configured all VG450 ports (except two) in a diff...
Hi everyone,I have a customer running CME version 12 and only one Cisco Phone 7841 can't make external calls. Any other voice register DN using the same phone model works fine for internal and external.I collected the output of "debug ccsip all" and ...
Voicemail stopped forwarding to e-mail .From RTMT alert it shows recently created multiple Core dump.I have rebooted PUB and SUB and restarted "Connection Mailbox Sync" service and checked status ,still have the same issueConnection Mailbox Sync serv...
Installed New 8841 phones, they intermittently drops calls, At that time, display shows Detecting Network then phone is usable again. This takes about 5 secondsCUCM 11.5,VoIP 8841 HW Version 42 with firmware 12.8.1 (Upgraded to Version 14.0.1, Sa...
Hi Guys I hope somebody can help me with this. I would like to make a SQL Query on the Callmanager Publishers for the fields "Device Name", "UserID 1" and "Owner User ID". I found already the fields "Owner User ID" and "Device Name" with:SELECT devic...
Hello Community, I've got a IP7970, registered on a CME (on a c892). I've got an SIP number from my ISProvider, along with the sip-server, registrar and credentials. All works on a soft-phone, but for the life of me, I'm not able to have it register ...
Hey there, Looking for some assistance with CUCM. I am trying to make the Calling ID for redirected calls show the 10 digital local number of the IP sets In the gateway (setup for MGCP) under "Call Routing Information - Outbound Calls"If I set "Call...
I got this strange error message in a CUCM 7.1(3) trace. Does anybody know what it means?"CCM|MmmanService - ERROR Too many calls to decrementTotalNumberOfRegisteredCallingEntities, Already at zero."There is a lot of these errors in the trace.Do I n...
