Hi,I have configured the Call Forward No Answers in the Cisco IP Phones in the CUCMv8, my question is: In the SRST mode, the phones registered in the SRST Gateway lost this CFNA configuration?Thanks
Hi, I'm in the process of migrating a CUCM cluster from physical to virtual.The version of CUCM (8.6) is supported in ESXi v5, but in one of the UCS will run also a CUEAC 8.6 which is only supported on ESXi v4.0 or 4.1.The ESXi licenses has been orde...
Hello,I have a PRI line and i want to cofnigıre 444 XXXX DID number IPT LineWhen I called 444 XXXX ,calls ring one time and end.Ex: if outbound calls PRI line , it should be ring 8945 Here is my voice gateway configredundancy!!controller E1 0/0/0...
Hi Guys,Do we get good voice quality for VOIP calls over best effort qos ? I do not have any dial peer or voice related configuration but only a best effort QOS.Is there any specific config required for this ?Best regards,Santosh
Hi all, Looks to me like a simple Question, however I wasn't able to find any Documentation or Posts on the Web… We're using CUCM 7.0.1 with the Mobile Connect Feature that forward Calls to Mobile Phones.The Mobile Connect enabled Line is also a me...
Hi All,I am trying to do a no tftp-server flash: command, from my show run output it is displayed as:"tftp-server flash:/Desktops/TN-Cisco-Color-7975.png alias Desktops/TN-Cisco-Color-7975.png".I copy and paste this into the CLI and add the word "no"...
So, one of our customers has sublet some of their office space to a tenant. The tenant is sharing the CME (8.8). Is there a way to have a different System Message on half of the phones so the handsets read the correct compnay name ?Thanks
Hi,I am having an IP phone with 2 lines configured in it. If i get a voice mail in line 1 the MWI light will blink where as if i get a voice mail in Line 2 , MWI light doesn't blink. So is there any solution to make the MWI work for Line 2 also.Call ...
Hi Guys,We have a plan to deploy SAF in our company, so I did some test in the past a few weeks.The result list below: (CME 8.1, CCM 8.0.3)1. CME --> SAF FW --> CCM. Call from CME to CCM is successful.2. CCM --> SAF FW --> CME....
In our current setup we don't sync call manager with LDAP so the various CTI services we are running have used end user accounts (this has been upgraded from 3 > 4 > 6 > 8 over the years)We now have a need to sync our cluster with LDAP for users so I...
Hello to allPlease can someone help with a hunt pilot issue.We are transferring calls out of our CCX script using a call redirect step, the call redirect is placed to a hunt pilot number of 00000002.This hunt pilot calls a number of sccp phones using...
Hello,In my UC Demo, the sccp phone can create over 3 parties ad-hoc conference using DSP (inclue sccp phone),but the sip phone only create 3 parties (include sccp phone).My test device : ISR2911 with PVDM3-32, CME 9.0 , 2*9951-camera, 1*7911(sip),...
Hi ,I have 2 Progger Machine (Progger Sida A and Progger Side B) and AW/HDS installed on Progger Machine.(ICM Version 7.5 and SQL version -2005)I am unable to open Configuration Manager in AW when Progger B went down. It give me an error " Faile...
I have a 3COM 3101 SIP phone that I am trying to add to a Cisco Call Manager 7.1. Please if you have any previous experience with this kindly drop a note as I have been on this for close to a week without success.Regards,
