IP Telephony and Phones

Hi,Are you planning to implement the selfview option during the call on the CTS 3000 ? Thx

hi i want to upload A Music file in cca graphical or by command mode .need to activate if when ever client calls fom outside and press extenstion number should forward to that specfic number ..Regards

Hello All,Could someone point out , what is wrong with this Configuration .When I removed the Voice-hunt and call 4067062162 from outside the Phone did not ring , but when i replace Voice-hunt and called again  it rang , but the BACD & AA did not wor...

We have a new Cisco 2951 ISR with CME installed by consultants a few months ago(due to my lack of knowledge and time).  The system replaced an older 2801.  The 2801 ISR would support either ad-hoc or meetme conferencing as i was told and now i suspec...

We have a customer with CUCM 7.0.2 with phone proxy setup in ASA for some of their remote users, now we are planning to migrate them to CUCM 8.6.2. What do we have to do to make sure the same setup works in CUCM 8.6 ? Is there anything changed other ...

HiI have uploaded a coporate background image on 20x7965 phones. The images successfully displays but after 24 hours a black line appears near the top of the image. After a reboot of the phone the line disappers.Does anyone have any ideas why this wo...

Hello,we have installed the new CUDAC with our Cisco Call Manager 6.1. The Attendant Console is working fine. Incoming Calls are going into the Queue and can be parked or forwared.Our problem is that we have no entrees in the internal directory. The ...

Hi Guys,             Can anyone tell me how the voice traffic originated by a Cisco Soft Phone (CIPC Client) can be marked and clasified. As far as I know CIPC client mark the traffic with DSCP value itself. Now my concern, is that marking will be tr...

HI,I have ccm 6.1.5.When i go to disaster and recovery and then when i click manual backup.The page is blankI already restarted Tomcat service,changed the browserAny advice

Hello,I have been battling with this issue for a month now and I am completly stumped, I would appreciate some help or advice.For quite some time I have been running a VoIP PBX that was linked to an Alcatel 4400 PBX via two 2600 routers on an E1 link...

HiWe are experiecing something strange;  Using Cisco Jabber for iPhone we can not make any outbound external calls, the user gets a fast busyNow the weird thing, it does work for one user, only difference is that other users have their IP Communicato...