Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
CUCM GUI Showing an error.I just bought a new cucm server from cisco . It has an cucm 8.0.3 iso image in its hardisk. I just installed it from there. And i did not put and licesence installation in it. And i started configuring it. After sometime it ...
Hi,I am trying to configure call forward on all the DN's in the office to PSTN number if no answer. I can do that for individual phone but I want to do that for all the phones. Appreciate your help.Thanks
Hello,At the moment when I press redial, or select my speed dial, the phone does not show the number called until it actually connects / the first ring-back tone.Is there a way to change this behaviour?Phone: 7960.CUCME 8.5.RegardsFelix
My users are prompted to change the voicemail pin.How can I diable that so that my users do not have to change the voicemail pin ?
Hi,I need some help on voice message issue. We have an IPT setup for 150 users with no voice message configured. We have Cisco unity unconfigured in the system. Now please help me to get the answers of below queries-we must need unity, unity connecti...
Dear All ,I have some issue in NTP Settings in my CallManager ,I have different NTP server for different countries and this NTP are configured for Different Call Searching Space .But now i am getting the Same NTP time in all call Searching Space .Can...
Dear all, we have to reserve some direct PSTN lines for manger.the platform is CUCM with 2911 as the gateway.in CUCME its quite simple and i have deployed it a couple of times using COR but for CUCM i have no idea.any suggestions !
hi,we have a central call manager and up to 10 SRST sites connected.I would like to block Some users from dialling outside number starting with 901xxxxx .But due to some techincal reasons i can not do this from our call manager,so it has to be from ...
How to add Presence Client in the call Manager
Hello,I am having Call Manager 4.2 with 2811 router configured as MGCP Gateway. Was having only one main number coming through the router to the reception phone through the router and then to CCM. It was configured on the Gateway configureation --> E...
I am integrating CUCM version 8.0.3.21900-8 with ASC EVOIP recorder version 10. The problem is I am finding many calls with zero duration in the recorder, and really these calls aren't zero duration.Someone know what is happening?Thanks,
I am using Cisco UC-520. I am also using Cisco call connector. The flow of auto attendant is like 1 for ABC 2 for CDE and 3 for XYZ. My requirement is If customer dial the auto attendant and press option 2, in the pop on the user its shows the select...
Hi,I have recently configured SIP Phone 9951 in my network which went well and i have voice and video communcation between two 9951 Phones.But now the problem is since its existing netwrok which is all SCCP phones (wireless Phones and 7975 Phones mos...
I'm operating a CallManager 6.1 system with about 200 phones. Recently, one particular DN has been unable to receive calls, although they can still be placed. I've placed that line on two phones to make sure that it wasn't just a hardware issue wit...
HI, How to intgrate Cisco E 20 phone with Trixbox. Please helpThanks Amardeep
