IP Telephony and Phones

CUPC without CUPSIs it possible to use Cisco Unified Personal Communicator installed without Cisco Unified Presence Server? In the Login window asks for a login server. Is the CallManager or presence server.Thank you.A greeting.

Hi,I have a issue whereby external calling parties to analog phones are not getting a ring back tone; no issues with internal calls. No issues with the IP phones as well.The PBX is running on Cisco 2951 and CME version 7.1.Any information would be ve...

Hi all,Anyone have ever monitor voice gateway e1 port usage.if yes, what software usedthanksATommy

Can any one explain me how to set IVR in uc560

Hi everyone,How much power should a 9951 want to draw while idle?We're running in to an issue with the quantity of 9951s running off our switches and the switches running out of power to allocate. Obviously during boot up the 9951 wants the full amou...

I had a wiard problem with customer's new 3925 ISR with 15.1(2) .T4 IOS that has 3 T1 CAS circuits and telco has provisioned to send the last 4 digits however, gateway recoginzed only 1 digit (the first digit of the last 4 digits) and had telco remov...

Hello All.I'm facing a one way voice problem between a Cisco 2801 and Elastix.I just configuring a dial-peer pointing the traffic from PSTN.Caller from PSTN side can hears the Called from VOIP side.The topology isPSTN <--> voice gateway   <--> Elasti...

Dear NetPro gurus,I have a customer where they have a remote site that needs SRST feature.  During normal operation, all the site phones will registered with the CUCM 7.x over WAN.  However, when the WAN is down, the customer wants the remote site to...

Afternoon all, We have a two server here, which is due to go live in 3 days time. We had issues when installing the locale and a TAC was opened, and a ES was installed which over come the issue. We are rolling out the phones now, and I have noticed t...

Hello everyone,Situation.  All inbound calls are showing up as +1XXX-XXX-XXXX in the directories for Missed and Received calls. WHen a caller wants to dial one of those calls back it works fine if it was long distance call but if it was a local call ...

Hi,I have a problem with SIP phones on UC500. UC500 has a SIP trunk and when I try to make a call using a sip phone that's not working.If I use scpc phone everything is OK.I tried to bind interface on voice service voip for sip, to setup outgoing pro...

Good Afternoon,     I have a quick question about setting up Call Manager (version 7.1.5.31900-3) to work with a Copia fax server. One of our deparments has purchased this solution from Copia and we need to get it working with our Call Manager. In sp...