Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have added new cluster node in current CUCM 8.6 and its added successfully but when I logged in into the CUCM after installation, it shows invalid license under licensing. Please help..
Hello,Using a SMTP request and the following TCL script: app_voicemail_offramp.2.0.0.0.tcl I'm able to generate a call.We have a Cisco 3825 and a Cisco 3925. The first one uses a SIP trunk and the latter uses ISDN. The 3825 obviously uses a VoIP dial...
Hi All,We have 1 CUCM cluster with 2 Servers 1 PUB and 1 SUB at main site. We have another remote location site that is runnning a few units of phone which is connected using leased line. We have just upgraded our callmanager version to 8.5.1.11900-2...
Hi All,We are faced today one unexpected problem,Cisco call manager service restarted automatically.we have cucm 8.0.3 version.please infrom me any one faced this same problem,why this happened.Thanks.
Hi allHave installed the Attendant Console, and all contact in Directory and Speed Dial window come with unknow status (a question mark). How to fix this? thanks in advance. Roy
Hi , We have a cisco 7961 phone, where the user demanded privacy enabled. i enabled the Privacy by setting it to ON and set the soft key template to standard ccm template with barge and privacy . But it is still not showing on the phone. What can be ...
Dear All,Ive been trying to get my VGW (Voice Gateway) registered with my CUCM_7.1I need to add the isdn bind-l3 ccm-manager in my serial interface. BUT THIS COMMAND IS NOT SUPPORTED The only command similar to this is isdn bind-l3 q931.I tried chang...
Hi,Is it possible to have a 3rd party softphone client (eg. Bria ) running on an iPhone/iPad for CUCM that uses WIFI and 3G? I'm fairly certain it is but unsure what I'd need to test it in my lab? I have CUCM 8.6 and can test the WiFi but what will I...
I have a capture of a failed outbound fax call via SIP. Sometimes the calls work and sometimes they don't. I have attached the captured and wanted to see if someone could review the debug to help determine would could be causing the issue here. Th...
Hello there!I'm testing a cme and everything works fine. FXS works great and i can do all internal calls without any problem. Now i have this issue: i got a external line with no function besides gives me a dial-tone (when i plug this line into a an...
I have a client looking for a Ip Tlephony Deployment in their company for 180 users based on this requirement i have requested for the MCS7816I4-k9-cmc2 with cucm8.6 qoutation and pricing from the cisco partners they have advice me to go with MCS7835...
Hi all,I'm trying to test FAX usung ATA 187 on a CME9.0.The design of the network is a collapsed core/distribution.i.e there is a switch layer 3 , C3750E, that manage all routings (It is a core and also a distributions). And the access switches,C2960...
hi all,here is my scanrio,i have 2 uc560 devices and each side we have pri trunk connected and i connecteed these 2 devices by h323 trunk , so i can call extension both side.but i need to access remote pri trunk from site Alike from site A we need to...
Hi friends, I'm using CUCM 8.6 with gateway 2901, configured as MGCP. I'm Using VIC2-2FXO for PSTN termination.The outgoing calls from fxo is working fine. But the incoming calls hangs up and not ringing the ip phone.ccm-manager mgcpno c...
hi folks,is there any tools available to monitor traffic b/w call manager and gateways/switch.
