Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,In the coming months we will be aquiring an offsite facility for our Data Center. One of the ideas floating around is moving most if not all of our Telephone System to this site, (2x Call Manger Boxes, 1x IPCC Express, 1x Unity Connection, 1x ...
I've searched the support community and have found a few references to a silent install for the cisco 7.1(5) TSP but no definitive answer if it can be done for non-administrators. Can or Can't the CUCM 7.1 TSP be installed via a script for non-admin...
Hi!I have a ISR G2 2911 box with a basic CUCME 9.0 config and a PC with IP Communicator 8.6 installed.The IPC gets registered but fails to change its locale to Russian. Here is the relevant part of the config:Cisco2911#sh runtelephony-service max-eph...
For incoming calls into CM i am prepending a 9 at the gateway so that when a user searches through call logs on their phone they do not have to edit dial a 9 for outside. The problem is when the call is sent to unity connection the number still shows...
I have a lab router with a VIC2-FXO and VIC2-FXS cards. Everything has worked just fine on it until the other day I blew the config away to start over with the lab. Now I cannot configure voice ports.A show diag shows the voice cards but on the PVDM ...
HiI configured the CME on the Cisco 2800 and it worksBut now I need to configure these two operations1. When the user does not want to disturb or is out of ofice, all calls are automatically transferred to another user B (the number of User B must be...
Hi Guys,I'm no complete stranger to VoIP (I've done maintenance and port configs before), but I've been tasked with working on getting groundwork laid to a new implementation on our LAN, and I've never worked a VoIP project from inception to the end....
HiI configured the CME on the Cisco 2800 and I have many problem1.The number 8100 does not receive callWhen calling this number you get this message: There Is No mailbox associated with this extensionHow to fixe it ?2. I want all incoming call on th...
Hello everyone,I have a question regarding a "problem" on a unity connexion. The mailbox language is set to "Italian", the caller language "Italian" but the greetings is always played in English ?Do you have an idea?ThanksHervé Jacquemin
Hi,we have cisco 2900 series H323 router with CUCM 7.1.5 in our office. Also we have 5 Analog CO Trunks which are terminated in FXO ports.These 5 CO Trunks are used as backup incase the primary PRI failes. So that any ip phone can make/receive calls...
Hi All,Everyone keeps talking about "call disconnection" issues, but I have a bit of a call connection issue.I have a CISCO 2811 with a 4 port FXO card and this is connected to a Windows server running FreeSWITCH PBX. I wrote a program which triggers...
HelloI am a relatively new user to CUCM Administration and this forum so apologies if I am posting incorrectly.I have a question which I am hoping someone can help with.In a CUCM 7.1 system which consists of several sites with the ususal device pool/...
Hi,Configured Unity Express, created users and created mailboxes. But when I try to test it internally the call is not going. Unkown number is displayed. When 'debug voip ccapi inout command' is executed it is taking the correct dial-peer but showing...
Hi,Backup taken from CUCM version 7.1.5 can be uploaded on another server with CUCM version 8.5??, i mean it will effect any configurations done on 7.1.5 after uploading on 8.5???Firasath
Dear NetPro gurus,Currently one of my customer has a CyberData Paging System that is integrated into the Cisco CME router perfectly now.However, the customer is considering to upgrade this CME router to CMBE and i was wondering how i can assign the i...
