Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,We have a user that has a 7960 phone, everytime he is on line one and someone calls his line 2 the phone does not ring at all. However, 3 other users that pick up the phone for him have his two lines on there phone and the second line does rin...
Hi Guys,Having major issues installing CUCE-Editor-Installer-7.0.6 on Windows 7 Enterprise x64. i had this working fine on the x32 but now when i dobule click on the package it extracts, thinks a whiel and then nothing.Any help woudl be much appreci...
Hi,I am planning an upgrade from CCM 4.2.3 to CUCM 8.5 on new servers.I have upgraded to CUCM4.2(3)sr4b with 8.4.1 firmware, which can go to 9xx.Connecting IP Phones (7911 and 7941/61) on CUCM8.5 Ip phones upgrade to 9.2.1S and then connect to CUCM8....
Hi ,Please help me to find out a way to set a minimum level of Phone ringer volume for all the phone from CUCM 6.x version.
Hi,I have the following scenario:analog fax ---------------------- VG202 ------------------- CUCM (8.0.3a) -------------------- 2821 Gateway (12.4(24)T4) ----------------- PSTN analog MGCP ...
We have a situation where at a certain time of day, one day a week, we get overwhelmed by customers and inbound calls.This is normal, it happens for 30 minutes on Wednesday. All other call volume is light.On Wednesdays for thirty minutes, the volume ...
Hi , We have an issue where 4 phones are configured and one is the boss's phone other 3 are subordinates, Boss's extension is shared on all the other 3 phones. and a call on boss's phone should ring on other 3 as well, and it rings successfully simu...
I hunted around and could not see if there was an easy way to do this:Route Pattern 5555 ----->SIP trunk------>PSTNOn the display, can it show 5555 - PSTN, instead of just 5555 of the called party? I know in Unity when you connect to the VM server,...
hello gentlemen,I would like to see if someone can help me clarify things. we will be enabling a T1 QSIG trunk between Cisco 2911 and nortel pbx 61c. my question would by on the type of cable and the length.i would assume the cable is RJ48 cross ove...
Dear AllPlease HelpThere are two IP Video Phones (7985) Phone A & Phone B. "Phone A" is local to CUCM while "Phone B" is placed over the WAN, in a separate region. After a successful Audio/Video Call; while trying to finish the call; Phone A gets stu...
Hi everyone!I need 2 E&M cards in my 3945 ISRG2.Scenario:NM-HD-2V network module with two slots + 2x E&M interface cards (VIC3-2E/M).I already have one PVDM3-128 in my 3945 router.Question:Will this module use the same PVDM, which is present in a rou...
Hello guys, im getting empty CDR files. All I see is the headers but no information of calls is available. The CUCM version is 8.0(2). I checked all services associated with CDR and are enabled. What else should I look into? Thanks.
Okay,I have looked through all of the discussions on this topic and I have tried several ways to associate an ephone-dn with an FXO port.IOS: 15.1(2)TMy simple configuration:!voice-port 2/0/8!!dial-peer voice 80 pots description Telcore_Intercom dest...
On the ol' ATA 186s, you could disable the second port if it was unused.Can you do the same thing on an ATA187 ? I can't see any way to do it...GTG
Hi All, I am designing a Solution for a client.Existing Analogue Phones = 2000 New IP Phones = 2000My client currently has a PBX with 2000 analogue phones and wants to upgrade to IP Telephony with 2000 new IP Phones.My client also wants to retain the...
