How do I block outbound calls from happening? Version 7.1.3 CUCM. These extensions are non DID phone numbers. But could in the future be DID numbers. Do I do it with a specific calling search space?
Hello,When I am in Cisco Unity Connection Administration I am unable to delete a user. I check the box to the left of their name but I don't even have an option to delete the user at all? Am I missing something? All of the help articles that I've ...
I was poking around to see if there is an application for click to call for CME. I see the Unifed Call Connector and I did get this to work ok. But it does not have the ability to dial from a webpage unless I missed something. Or does it require t...
My customer is running CME 8.6 with 7942/7962 phones. The most recent info I can find on CCO (the CME admin guide) indicates that Abbr Dial softkey support is restricted to phones other than what he has. However, when he uses the config shown below...
I am looking for advise on troubleshooting a ATA 186 and Cisco CallManager 4.1 cluster (2 servers only Publisher and Subscriber). The ATA is configure with two lines providing analog to a fire panel for monitoring. My issue is the fire panel will f...
Hello Experts,We are going to have a power shutdown this weekend. Is there a way to gracefully shut the CallManagers down before the power goes down? Also, when the power comes back up, will the servers automatically power up and come online? Is the...
Hi,I am planning to implement two SIP gateways/CUBEs at SITE A and site B for redundancy PSTN callings . This will be implemented on CUCM 8.5x and CUBE routers are 2951 with IOS 15.x.which option is bettter?1. to put two SIP gateways into one route-...
Hello,I am looking for information to configure a VG202 (Version 12.4(22)T5) to do secure call between an analog phone and an IP phone.It is specified that the VG202 supports SRTP (http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data...
Hello,Here is the scenario , I have following dial-peer Dial-peer voice 1000 pots Destination-pattern 9........ ( 8 dots)Port 0/0/0:15Dial-peer voice 1001 potsDestination-pattern 9T Port 0/0/0:15When i dial 9 1111 1111 11 then call is matched to di...
Dear Member,I got some problem when using CME 8.5 with CUE 8.6, everything is fine except I can't find any way to config or modify the setting such as add a IP phone on CUE link.As I m using CME and CUE version 7 before, CUE web link can add and modi...
Hi, I've an issue with call forward all to external number on CME 8.6, when I make a call from PSTN number to an ephone-dn which has call-forward all to pstn number no problem but when I make a call from an internal number to the same ephone-dn the c...
How can you get the Cisco 7941G to use ring tone through headset when there are incoming calls?It works through the software version of it (Cisco IP communicator 7.0.6.0), but I cant get it to work with the hardware version.
Not sure if this is the right spot to ask this question?I attempted to upgrade a 7940 SIP phone to SCCP.I think I got my upgrade version wrong, the SIP image on it was "P0S3-06-3-00"I attempted to put SCCP 6.0.5 on it. I think the SCCP image was too ...
Customer wants to setup call forward to an external number, the external number is one extension of one company, not direct line. As my understand, we can dial the number "123456,2222" by mobile phone, the call is successful. 123456 is the compan...
