Basic config of SRE-900. I am trying to install a VMSS package on it for testing, but the install fails.What is the trick to install from SOLARWINDS sftp server ON a local PC attached to home ISP router. seems we need to configure TTY 67 to ge...
Forum Posts
Hi,I have CIsco CME and CUE wiht 8841 phones setup as SIP.I am trying to configure a way to transfer calls directly into a users voicemail. I am aware that 8841 do not have the "TrnsfVM"But I was able to add an extra digit "8" in front of the extensi...
Hi All Thanks in advance !!! Can someone please guide me how to check or find the root cause of [RTMT-ALERT] NumberOfRegisteredPhonesDropped ? I can find only the error in RTMT but not the root cause for the same. Regards Rohit
Hi dears.i have these conditions in my office:Head Quarter: CUCM 10.5 + Cisco 3945 + E1 Modem >>>>>>to PSTNBranch A: phone A connected to FXS port of third party Voip gateway(New rock brand) integrate with CUCM using sip trunk.Branch B: phone B conne...
Hello, trying to figure out how to have one user control two softphone devices that are located at different sites. Current config is:Site A:Publisher, IM& P primary, Sub and Unity serversDevice DN #1 on Media grp, device pool, CSS and Partition conf...
Resolved! CUCM Inbound Call Configuration?
Hi, Ive been working on a lab setup for CCNA. I have a 2901 with the UC license applied and a SIP provider.I have outbound calls working on the phones in the lab and im now trying to get inbound dialing working. I have a DID setup at the SIP provider...
Help!I know it's a long shot but I was wondering if anyone had similar issue in CUEAC?Our receptionist this morning complained they couldn't login into attendant console.After investigating, it turns out, the "ARC CTI Server" windows service on the s...
This is the debug data:Aug 9 12:14:56 ATA192-MPP local1.debug vsock: SIP_getIpBySrvHost2(83) line(0) Resolving(proxy.sip.sapo.pt) port(5070), rc=4Aug 9 12:14:56 ATA192-MPP local1.debug vsock: SIP_getIpBySrvHost2(122) line(0), type=2Aug 9 12:14:56 ATA...
i need support in below task.i have 7 audios1- welcome note/welcome in Arabic language, for English press 2 (if 2 is not pressed it should continue with arabic language)2- for sale dept. press 1, for complaint press 23- same as 2 but in Arabic langua...
Resolved! Process of two cucm sip trunk call?
Hi allassume we have 2 branches A and B. In each branch we have third party voip gateway( new rock brand) with sip trunk integeratin with cucm( in head quarter).my question is:when phone A( connected to fxs port on newrock voip) call phone B(connecte...
Hi All, We have recently upgraded our Call Manager to 12.0.1.219, and now when I try to add a VG204XM gateway I receive the following error when I try to configure the FXO ports: " Access to the requested resource has been denied, The attempted a...
Resolved! Cisco Jabber Audio Issues
I'm looking for some help with an issue that has come up.Some VPN users that are using Cisco Jabber to answer calls are reporting that they are either unable to hear the person on the other end of the call, or that person can't hear them speaking. I ...
Im looking for the part number for the power supply for 8821 Desktop Charger part CP-DSKCH-8821=. It did not come with the power supply.
HiSome help required please. I need to set up an analogue phone on a 4321, with 2 port FXS NIM installed. Its all set up (config below) but there's no dial tone, and the cable status on the voice port is 'not connected'. I've turned the rj11 cable ba...
HiWe have a CUBE and we need to modify the Remote-Party-IDNow it looks like this: Remote-Party-ID: "personal name" <sip:123456789@X.X.X.X>;party=calling;screen=no;privacy=offWhat we want: Remote-Party-ID: "123456789" <sip:123456789@X.X.X.X>;party=cal...
| User | Count |
|---|---|
| 7 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
