IP Telephony and Phones

when i press the directory botton in the ip phone it didnt show the directory numbers tab.i am using cucm 7 and the Enterprise url for Directories is:http://10.10.10.5:8080/ccmcip/xmldirectory.jspeven when i put this url in the device itselve it didn...

Hello Team,does anybody know a document describing CUCM features which are transparent for the users on different CUCM clusters, which are connected through a Intercluster-Trunk. Of course, this might differ for the various CUCM versions.best regards...

Hi All,May i know, How to see the History of CCMAdmins, We will have lot many Admins according to their level in the firm,Once we provided the permission of CCMAdmin He/She can remove the DN/GW/Trunk..My Question here is If anyone of the Engineer(who...

Please introduct solution cisco SBTG for me.Requirement4 fxo and ipphone about 20 unit.thank you

Dear AllWe are encountering one strange issue and we need your adviceThe current senario is:All Phones register first to Subscriber CUCM.All Phones have first TFTP the Publisher CUCMNow the problem is:Local calls : MOH is okOutgoing calls to PSTN net...

Hello all,I did an Update from CUCM 7.0.1 to 8.6.1.20000-1 and have now a problem with some incomming ISDN calls. I have a H.323 gateway to PSTN with IOS 12.4.24T5.Calls from Telekom or Swisscom as Serviceprovider are working without any problemsCall...

Let's say I have two sites. They dial each other over a WAN with e.164 numbers (including the leading + symbol). If I'm in one site and call someone at the other site and they don't answer, how will my number show in their missed call list. With the ...

Ive got a user that randomly when someone calls from the outside it goes straight to voicemail.  internal calls work fine.  Ive tried swaping phones, patch cables, deleting the DN and ephone, etc.  The account is setup exactly like everyone else in t...

Hello,How would I do updates on my cucm 8 server?Thanks.

Guys,does any know if the SAGE CRM application works with CUCM? If so can anyone point me to the documentation for the integration. All I see is documentation for CUCME on UC520, I cant find anything for CUCM.Thanks

Hello All,I just observed that the time display on all Cisco Phones in my network are incorrect. Prior to now, the time was correct but of recent the time is ahead by about 7 minutes and no change was made to the servers. The model of the phones are ...

Any idea how I might get a 7912 set to take the configuration I have setup in CallManager rather than seeking to auto register?  I have tried both of the following suggestions, but the phone always reboots to 12:00 a 01-01-00 AUTO-REG.Step 1 Press th...

Hello,we have a CUCM 8.6.2.20000-2, and we have configured a SIP Trunk with a Cisco Router, which is connected to a PBX by an E1.We have this issue: if we make a call from a first Cisco IP Phone to a PBX phone, and this PBX phone has a "forward all" ...