I need to deploy SRST FALLBACK on local router ISR4321 version 16.6.4The CUCM cluster is in mix mode version 12.5.1.13900-152The customer have 8811 and 7821 IP phones all the phones are on secure profile TLS (encrypted) When I test the SRST only n...
Hello, I'm new to forum and to cisco.I'm a user of Vodafone in Greece that provides me FTTH 100/10 with Data, Voice and TV. Few years before I bought one 2801 Router and one 2901 in order to play with for learning.Vodafone serves all this services f...
Hi I have 7821 IP Phones and need to register it to 3rd party PBX. We need to be able to configure it through web browser. Not through the XML file I see we can convert our 7821 into MPP firmware provided it is V03 I need to ask if this requires lice...
Hi All, Appreciate if anyone by chance have this device pack, please share it with me. Urgently needed. cmterm-devicepack9.1.1.21033-4.cop.sgn Thanks in advance.
I have a new Cisco 561 headset on version 2-2-001-3 that is exhibiting some odd issues. When connected it registers and associates to the Cisco 8811 phone. When trying to make calls the audio on the headphone is so low that you can barely hear it. I ...
Hi AllI have a smilar question for CUAC 10.5.2 and CUCM 12.5 so my question that CUCM 12.5 is compatible CUAC 12.0.1 I can not see this information on the compability matrix ? I can not see that cucm 12.5 and cuac 12.0.5 is compatible or not this doc...
Hello i’ve been asked this multiple times now.Say i have 4 Cucm servers in a cluster, 1 Pub.The publisher servers is the only one running the Extension Mobility service, if the publisher shuts down, what happens to the phones already logged in to pro...
I powered off the users 7965 IP Phone and then plugged in a 8865 IP Phone and come to the screen where I enter the extension number and pin to migrate the phone and get this error message: I'm not sure where it is looking for this information. If I...
Hi there,we frequently use the Conference Now feature from our CUCM (running on 12.5.1.14900). Calling from inside we get the correct announcement in German but callers from outside hear the english version which is pretty annoying. The CUCM is conne...
Hi I Have 3 phones registered in SRST mode ( wan is down )What will occur if the phones got power cycle ?Did the phones should get registered again ? from what I see the phones not registered and didnot get IP address from the DHCP . ThanksEli
We are low on extensions and licenses so if some one has not used their 7925g or 8821 in 90 days we will take that extension. Is there a better way to find out how many days an endpoint is inactive for than entering in the MAC one by one in ISE and t...
Good Afternoon, we are currently in the middle of making some tweaks for the Ray Baum act requirements in January of 2022. Looking to see what other customers are doing to track the mobile device (J4W registered through VPN, and 8800 series register...
Dear, I bought this used device and already managed to update its firmware to SIP, it's with version SIP70.9-2-1S, and it's working perfectly with Asterisk. I would like to access the device via SSH. I've already done the configuration in SEPMAC.cnf....
Hello,I have a CME running I believe 11.6. I have read the various forums and attempted to get the caller ID to go with a transfer, but it does not work. So outside caller A dials the main number, enters a persons extension, Phone B, that person sees...
Dear Members, I've 2 problems, I'm running cisco CP-7821 with with Aestrisk PBX yeastar. I make them register with PBX but unfortunately no call logs showing. I couldn't figure it out call history where i can set it up. 2- I watn to register "line B...
