Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,Does anybody know to change the Dnis timeout on E1 R2 interface?The pstn is dropping long distance calls after the timeout.Best Regards,
Hi All,I am currently using Cisco 3845 for my SIP.When ever i dial my inbound number, out of 10 call only 5 calls are getting establishe and remaining 5 calls getting engaged. I did debug isdn q931 and below are the output.Can some one suggest on...
Hi,My CallManager is in 8.5 and ip phone 6945.When I receive a voice message I do not manage to take a line.If I listen to the voice message, I can take a line.Have you an idea ?Thank you for you help.
Can’t seem to bring up a Cisco Unity Connection 8.5.1SU1 secondary server (Subscriber). The CU Publisher is working fine and has mailboxes, etc.Post install of the secondary server I got “The installation of Cisco Unity Connection has completed succe...
Hi all,I am trying to move phones from one secure cucm 8.0 cluster to another 8.6 cluster (no upgrade).I thought do this steps:1. Delete LSCs 2. Set the phones to non-secure3. Add the ip addresses from the 2 new nodes to the old ctl list4. Change the...
We have CME acting as IP2IP gateway. The Setup looks like this:(Phone1)PSTN--(SIP)-->CME(Phone2)---(H323)-->CUCM6--->IVR.1. Phone2 makes CFA to IVR. Phone1 calls Phone2 and hears ringing instead of IVR prompt, which get to reorder tone after few ring...
My office has several branches that need the use of a cordless phone. Due to the nature of our business we cannot have a wireless network active at our locations. Is there a cisco (or cisco-compatable) IP phone that is cordless that does not require...
Hi All,I am using Call Manager Express 8 , I want to use a password to allow all to make international calls.Please guide me how to configure.ThanksSudeesh
Hi,1. We have Call Manager 7.1.3 configured and integrated with MGCP Gateway.2. We have 2 E1 lines registered in the Call manager as a MGCP end points.3. When we dial the Toll free Number from the PSTN, the IPIVR is playing the welcome message and we...
Hi AllI need to improve IP telephony providing Fault Tolerance with Active/Standby architecture. I want to create in ESXi 4.1 two machines as backup of production physical machines CUCM 7 and UCCX 7.1. Someone have experience with this ? I know I ne...
Hello!I am on Cisco Unity Connection 8.5, and have just started to scratch the surface of the capabilities of Unity. I'm coming from a Asterisk back ground, so it has taken a bit to get used to, but I am starting to get the gist of how Cisco CM and ...
I am quite new to IP telephony. I would be glad if someone could explain in detail what it means if an ip phone is single line, 2-line, 4-line, etc.Thank you.
Hi all,i am searching for an ipphone handset which is developed for deaf user with hearing aid.any suggestions?regardsmehmet
We are working on an issue with our 7965 ip phones and have identified that our firmware is outdated and needs updated. I would like to only update the firmware on a single or a couple phones for testing before rolling out to the office. Anyone don...
We have a mix of 7900 series phones. We'd like to be able to have the phones return to the main screen after a specified amount of time. For example, once you get deep into a couple of submenus or just checking your placed or missed calls, it'd be ni...
