Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hi,Currently we are having a call manager 6.x version and it does not support ATA 186 anymore. All the branch routers are cisco 1841. Is there any way that we can plug FXS card to the 1841 branch router and configure?If yes, how?If no, any other solu...
Dear friendshow can i identify if my gateway is registered and online .. means in my enviorment we have multi tanent stuff.. means multiple BRI isdn lines conimg and temination on cisco 3825 and their own seperate card. when ever a line goes down i n...
I am starting to configure a 2921 with an ISM for voicemail.I've configured as follows, but telnet and ssh advises that the connection is refused:RTR#ssh 192.168.4.5% Connection refused by remote hostconfiguration that i have added:interface ISM0/0 i...
Hi all,We currently have our IP Phones connected to the switches (4 catalyst 3560). The Callmanager assigns the phone's ip by DHCP.Our data and voice LANs are completly separated, logically and physically.We want to use the IP phone's switch to conne...
in the 28xx CMEmax-ephone = 24 (# of sccp phones can be registered)now I have 24-ephones?I want to register more phones?Can I use sip phones instaed of SCCPAgain max # of phones registered (sccp+sip) is 24?
I'm getting the following error when I make a voice call into a new 3945 with a NM-8CE1T1-PRI voice card:*Jun 17 00:40:21.479: ISDN Se1/2:23 Q931: RX <- SETUP pd = 8 callref = 0x0004 Bearer Capability i = 0x8090A2 Standard = CC...
After a power failure at a site the cisco phones is giving the following message" Link down limited functionality"I have checked the config and also checked that the WAN links were up. Restarted the Gateway and the phones and still getting the same m...
hi ,does anyone know what went wrong ?- Phone A call reception 3134000, then reception at 3134000, transfer call to 6000, however reception can't talk to 6000 before she transfer to 6000.Everytime she press the transfer, user 6000 always hear MOH , ...
Im currently using a Cisco 3845 series router and running (3845-advipservicesk-9m) and CME. I am trying to connect to a Redcomm High Density Exchange Switch. My goal is to be able to make calls from my VOIP phones to my POTS phones. I am looking for ...
please let me which poe switch working cisco 7960 ip phone is it ok with catalyst 2960 pc-l
I have set up Mobile Voice on a customer's CallManager and Cube/SIP gateways. The customer is able to activate and deactivate their single number reach options by calling the IVR dial-in number. The problem that I am having is that the option for mak...
Is anyone aware of any 3rd parties that sell stickers for the 9971 phone...similiar to what came with the 79xx series? There are lot more buttons on these phones and this would be helpful for our users.Manish
Hi,Where is phoneloads files to register the WIP310 on CCME 8.6? In the link bellow there is not "Session initiation Protocol (SIP) software" for WIP310.. http://www.cisco.com/cisco/software/type.html?mdfid=282414126&flowid=5287 How can I to register...
Dears,i need in help in making the bill of materials for IP telephony system 1- The system will be provided to serve approximately 20,000 endpointsinitially and will be capable of serving a minimum of 25,000 endpoints.2- 2,400 trunk lines E1 or SIP3-...
Hi Guys,I have the following doubt: Is it possible to do the channel selection order when work H323 protocol? I know that when using the MGCP is possible configure in the CCM the order the channel ocupation (Top and Down), but, in the CCM not exist t...
