Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,I need some information on how licensing work for upgrading from 7.x to 8.5. Do I need to obtain new license files from cisco? What happens to my existing un-used CUWL license PAKS.I am little confused on how licensing works. If someone has any do...
We have aUnity 7 installation that we want to change the voice on the directory handler. Currently is is the default womans voice that comes with Unity. We have recorded a new greeting for the directory handler but it is still using the default voice...
Hi All,We need to migrate customer from aCUCM 6.1.4 cluster on MCS HW to 8.5.1 on UCS C seriesWhat is the best approach to coomplete this migrations to New UCS platformUgrade existing cluster to 8.5.1 then build new 8.5.1 on UCS from backup?Is this...
Hello,I have an issue with the upgrade from MPE 2.1.2 to MP8. I had a license for 16 audio and video ports in MPE 2 and now am trying to migrate that license to MP8. I have ordered the MPETOMP8-UPG= and the MP-CONVR-A-1UL-7.0, MP-CONVR-W-1UL-7.0 Conv...
HelloWe have a CUCM 7.1 implementation with various phone models, we have deployed 7911 handsetsover our ADSL WAN with little or no problems hanging off an 837 router..We have recently installed the 6921 phones at a similar site, now the problem star...
Hi!We have a customer that are using Project Codes to mark each call, so that they can bill the respective projects later for the calls.This is facilitated by the Telco.They are dialling the number and then you hear a beep and then you are supposed t...
Hi,we use CUP8.5 with UPC8.5 and Unity Connection 8.5 for voicemails.I can play voicemails via UPC and the pc speaker. It is possible to hear the message on the ip phone an not pc speaker?best regards,marco
Hi Every one,We had been using this setup for a remote site for last couple of months without any problems.Unity express running via ISM module on 2911 CUCME router. configs attached.However since the unscheduled power shutdown last week , Voice mail...
Hi, I am trying to import the usrers to Unity 4.2, but those users already have accounts in exchange server. What steps should I do to import them from exchange server to Unity? I tried to import but got following error, this user is on exchange serv...
I have a Cisco UCM version 7.1 (3) and my system is connected to a AVAYA system via SIP trunk. I have a question about a request that I just receive from the AVAYA VOIP engineer requesting for me to change the Cisco VOICE traffic to use UDP port 5204...
Hi EveryoneI have 3560 PoE switches with both data and voice vlans configured on each port:interface FastEthernet0/1 switchport access vlan 150 switchport mode access switchport voice vlan 151 no logging event link-status srr-queue bandwidth share 1...
How to send a voice message to multiple outside phone? Using CUCM 7.1.3 & UNITY 5.0. Like schools calling the parents say "blaa blaa blaa". Our company wants to send messages to growers and feed mill at once instead of calling 30 to 40 people telling...
What type t1 card would be best for SIP with a 2811 Router?
I have CUCM configured with SIP trunk to a SIP GW, and the SIP GW is connected via serial interface with a service provider (PSTN). the Call flow is as follow: CUCM ---- SIP Trunk ----- SIP GW ----- serail interface ----- SP. now calls from SCCP phon...
Hi All,We have purchased many IP Communicator 2.x licenses in the past, but would now like install version 7.0.6. My question is can I legally install 7.0.6 with the 2.x licenses or do I have to purchase upgrade/new IP Communicator licenses. Obviousl...
| User | Count |
|---|---|
| 4 | |
| 3 | |
| 2 | |
| 2 | |
| 1 |
.jpg "VIP Expert"){kind=icon}
