Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I remarked some strange behaviour with packet drops between 2 ip phones.Those phones (cisco 6941) are connected on the same switch and have no problems but on the switch I see Hic up in Jiiter & lost/drop packects” every 3 minutes in communica...
Hi allI have built a single server UCCX 5.0(2) and have backed up our working server and copied the .tar onto my new machine via usb. The problem is when I open the admin and choose the restore option and add the path I get an error complaining it ca...
This is a strange one. When ever the 6921 phone boots up and is on-line the display of the phone shows 0%.Shown in the picture attached.The phone is up and registered. Everything works. That display will disppear and show everything normal if a ne...
Is there anyway for us to upload the background image and xml file into CM8, and configure the URL in order for ip phone to have the specific background/wallpaper when first bootup
HiWas wondering if this is possible ,i have a client with a Call Manager 4 cluster at HQ site and a CME at one branch site ,the receptionist at HQ uses Attendant Console to monitor BLF ,is there a way that she can see the BLF status of the phones reg...
Hi Experts,I would like to know if the "T.37 Store-and-Forward Fax" function run on Cisco 2900 Seriese Router platform will consume how many DSP resource.According to the DSP Calculator, there are only "T.38 Fax Relay" listed as a "Medium Complexity ...
I was trying to set up MWI on CUE/CME integration. However, whenever I left a message, CUE will call the phone's DN for two rings but not lighting up the LED.Here's the config on CMEephone-dn 8number 1998....mwi onephone-dn 9number 1999....mwi offOn...
Hello,we have cucm 6.1 and we are about to upgrade to 8.5 so i have setup a lab enviroment,all work as expected except outgoing sip calls to IP2IP GW,CUCM send a=sendonly in an INVITE messages causing one way sort of call.reseting the trunk seams to ...
This might be more of a question for QOS, but it does have to do with voice, so I'll give it a shot here. We're a callmanager 7 environment using skinny and mcgp.I have a 4x T1 MLPPP WAN solution at my main site, and in case I decide to increase m...
Is there way in UCCX to follow the flow of a call in to and out of different queues? Would I use the CDRs from Call Manager or is there a better way to look at the calls within UCCX?Any help would be greatly appreciated. Thanks, Michael Putney
Hi Gurus,Is there a maximum number of Translation rules that can be configured on CUCM i.e. a design or a suggested/tested limit?I have tried drilling through various documents and have found other limits like CTI RP's etc but none yet for Translatio...
HelloI have a "T2" connection from France Telecom. An ISDN30 (E1) was requested. Handoff is RJ45. A standard E1 config is not working. Does anyone have experience with T2 connections? As best I can tell, a T2 is essentially the same as an E1. R...
I'm trying to upgrade a lab replica of my production CUCMBE server in VMware (ESXi 4.0 environment). We're currently using 6.1(3) and we're trying to upgrade to 7.1 (5b). When I perform the upgrade from 6.1(3) I get this error:CCMInstall|(Capture) ...
Hey,Prevoisly i've managed to get Nokia phones running on SIP (and SCCP) but i'm struggling to get my Android phone registered using SipDroid client. Has anyone managed to get their Android phone registered to the call manager using any 3rd part Andr...
Hi,I have 2811 with CME and a VIC2-4FXO, when someone try call to CME, always the signal is busy, on this moment there is no calls incomming to router, but 3 ports are "OPER" "UP", just one is avaible to recept calls with status "OPER" "dorm" :PORT ...
| User | Count |
|---|---|
| 8 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
