Estimados. Necesito saber la forma correcta de registrar este tipo de dispositivos SIP en CCM 5.1, e intentado con Third-Party SIP Device pero el equipo (que ehsta instalado en mi PC me arroja el error 404 (error de registro).Es por esto que...
Hi All,We have a customer service queue setup in UCCX. We can dial a pilot number to force close the queue but no force open option. I wonder if it's possible to do a setup to have force open option avaiable in UCCX.Please advise. Thanks a lot.Lou
Hello,I have a bunch of Linksys SIP phones and a c2811 acting as a CME. It has a VIC2-4FXO card in which I have extension 131 coming from a PBX (on voice-port 0/0/0)My SIP phones have 4 digit extensions, and I used the command "connection plar xxxx" ...
hi guys,i am stuck in little bit of misconception, e1 line we have 30 voice channels and1- timeslot 0 carries framing information and timeslot 16 used for signalling information out of band( CCS).2- in defining the rest of 30 timeslot channels we u...
Hi all,I've a deploy with CUCM 7.1.5 where application dial rules does not apply to call from Quick search directory from IP Communicator.I configured application dial rules on CUCM and installed on TFTP Server cmterm-IPComm-directorywizard but seems...
Hi all, I'm trying to use my Iphone as extensions of my CMEI've tryed both CounterPath Bria and Linphone with this configuration:voice register global mode cme source-address 192.168.10.254 port 5060 max-dn 20 max-pool 10 authenticate register authen...
Hi,I have a problem with my corporate mobile phones which are configured as remote destinations.- Phone A calls Phone B (both internal)- A PSTN phone calls phone A and hears a busy tone --> everything good so far- If instead of a random PSTN phone ...
Greetings,I am trying to find out whether TBCT can be implemented with the following scenarios. We currently have two 2921 H.323 gateways. The local telco offers the TBCT service. The telco switches are configured as NI2 and all 4 PRIs are in the sam...
HiWhat is the difference between these two licensing part# ?Both are same? During Upgradation of CUCM shall I get feature license from both the part#, then what is the techincal difference?UCM-8X-ADD-UWL - Additional Communications Manager 8.x Node -...
Hello, community.Recently customer asked me if it's possible to implement following scenario?1) employee is on active call2) employee's boss calls him3) CUCM discover that call from boss has "higher" priority than current employee's session and durin...
I am configuring mgcp gateway (2911) to a callmanager 8.0.It is T1 using pri net5 switch type.When I go onto callmanager , on the main screen for the gateway I can only choose euro or australia switch type and when go into port config here is no opt...
Hi,Need to perform some add moves and changes, but the customer does not have its Directoy Manager password anymore.Tried all the know procedures by using the passwordutils and umencryptext tools, restarted dcdserver and iis, but still having problem...
Hi all,We have recently deployed a simple CCME+CUE router and ASA firewall for a client.Apparently all calls are made through 4 FXO Anolog lines to the Telephone provider.No Sip/h323 ITSP or etc.My client is cautious about their analog lines being ha...
