Hello Everyone,I have UC 560, ESW 520 48 port POE switch and window 2008 R2 server. My question is i have to use DHCP pool from my window 2008 R2 server.For that which changes i should make on UC 560?????? I know how to configure DHCP pool with optio...
I have an ISDN gateway interfacing with a PBX. I have the Calling Search Space set in UCM 8 so it matches with all of my other gateways (abotu 40 others). The end user on the PBX dials 8-XXX-XXXX, and the PBX is supposed to send the call to the rou...
Hi, i have a Cisco 2921 running CCME 8.0, i'm using callblocking overrride with the login softkey. Everything works well with 7962 phones but recently this feature stops working on 6941/21 phones; sometimes when you chek the configuration via GUI th...
HiIPMA setup with proxy line. Seems like a very simple thing but I can't remove the assistant-watch icons from the screen of the phone. Its a 7975 and we are running callmanager 6.1(3)The manager doesn't need to do anything as the assistant handles i...
I am haivng an issue configuring barge on UCM version 7.1.2su2. I have read the features and services guide for version 7 and gone through the Barge Configuration checklist.Trying to set the Single Button Barge feature on there Cisco phones as they h...
Hi all, in a CUCME environment, is it possible for a 7945 for example, to change the order of blf and speed dials. Because now, if i issue the command under ephone:blf-speed-dial 1 954 label "XXX" deviceblf-speed-dial 2 955 label "XYX" device...
Hi all, I have a confusion regarding DID (direct inwards dialing). when an organization purchases a range of numbers for DID/DOD, does the organization have to use that range for internal and external purposes or else can we ...
Hi,I am able to assign button (under ephone) to only 24 cisco 7942 IP Phones though i was able to add ephone-dns and ephones, for CME version 7.1 on Cisco 2921 router. Licenses have already been purchased for adding the phones (FL-CME-SRST 25 X 3) a...
Hi guys,Can anyone please offer assistance on upgrading the firmware on a Cisco 7941G phone using ccme i.e. CLISpecifically I am having some trouble finding the actual files. I have selected the correct version 8.x.x on the Cisco site, however after...
HelloI have a CUMA 7.1.3 server, when I try Add new phone to user and select service provider in model field not appear the blackberry models and Iphone to select phone. Any Idea for this.Attached a picture.regards.
I have setup a SPA400 with 4 FXO lines. When I receive a call via FXO port and the call is not answered, then at the next call that I receive via FXO port , I see the caller id of the previous unanswered call. Is this a bug or I have to setup someth...
I am trying to connect a Plantronics HW261N headset to a 7942 deskphone using a Plantronics adapter. I assume it should be as easy as connecting the headset/adapter to the back of the phone, but apparently not. There is no sound coming through the he...
I have phones connected to 6500 series switches , 7912G phones keeps resetting randomly.There are 796X phones which works fine.I tried increasing the Keepalive in callmanager to 45 secs but still the issue persists.I can see the below logs in 6500.2...
I have below problem. I have added bulk speed dial list in CME which has got entries like this.The prefix is #7933,934481800001,Test user,hideIn above by dialing #7933 user will reach the phone number 81800001 and 9344 is the destination pattern o...
Hi all,I am trying to install the CUCM 7.1(5b) on a Proliant DL380-G5 server but im getting this critical error before even starting: "Not enough physical disks 0 out of 2". I have two disks with RAID1 that are being seeing by the hardware but once i...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 01-16-2026 03:24 AM | ||
| 12-31-2025 01:52 PM | ||
| 12-10-2025 11:24 AM | ||
| 11-16-2025 10:18 PM | ||
| 10-15-2025 09:15 AM |
