IP Telephony and Phones

Hi AllI am currently working on a tender. This is something new to me and I wanted some pointers.I am learning to use the dynamic config tool for cuwl licensing but am having some difficulty in understanding all the products.The breakdown on devices/...

I had a faculty member who I recently converted to a 7962 from his Nortel M7208 and he was upset to find out that just like the Nortel M7208 the 7962 was not activating the t-coils in his hearing aids.  After some searching on the internet I found th...

When upgrading CRS 3.5 to 8.0, it's necessary to upgrade it to 4.0, then 7.0, then 8.0 (then 8.5). CRS 4.0 is compatible with CM 4.1, but when upgrading CRS 4.0 to UCCX 7.0, CM 7.0/7.1 must be up and running. I'm migrating both apps onto vmware. Here...

Hello CSC Team,User have vaild DID/DOD Number:4321 with local Access and PSTN line:07123456 with National Access Via Voice Gatway .when a user received an national call on IP Phone its display Unknown number.So please send GW Configuration to enable ...

Hi,i have CUE v7.1 (ISM module) and i created AA and VM. i am not able to change the option of MaxRetry for the AA script. i want to have this parameter as "0" so that i do not hear the message "Are you still there"from the GUI iam not having this op...

Hi group, trust you are all well.I have this strange problem with my FXO card in my 2801, at first I thought it was down to my UCM but I reverted my Router config back to ccme but the problems continue, I will try and explain the best I can.OK I call...

I had CCM 4.1.3 and needed to upgrade to version 8.0(2c). I ran the DMA for CCM 7.1.2 and was able to get the tar file. The customer ordered new hardware and it came with CUCM 8.0.X System Installation DVD and System Recovery DVD. The other media tha...

Hi,My friend told me yesterday that he has a 7921 WIFI IP Phone and a D-Link access point.He's not being able to see the D-Link when he's checking for Access Points in the phone. Those phones work only with Cisco AP's? Thank you!

I am installing Cisco phones in Tijuana, MX with Call Manager 7.1.3.  From another post on this forum it sounds like I need to use H.323 for my gateway (router is 3825 with VWIC2-2MFT-T1/E1) since E1  R2 is not supported with MGCP?  Has anyone set up...

Guys,I'm trying to integrate my Outlook 2007 (running on Windows 7) with CME 3.3. I followed this document http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a008087407f.shtml. I installed all the necessary softw...

I am trying to get this 2 features working correctly using SIP FXS config but having some issues. Call waiting: I receive the alert tone on the incoming call and I'm able to do a flash-hook to answer.  Problem is when I flash-hook a second time to go...

I recently replaced a customer's Call Manger server with a new server running CUCM-BE 7.1.  Everything is working well except for a random issue we are having with some of our 7940 and 7960 phones.  Here is a description of the problem:Users cannot m...

Hi Folks,I am setting up a simple CCME using only 7911. I have created local directory using the GUI and had it enabled. I noticed that when i access the service>directory, i get an error " Host Not Found' Below is an extract of the services.caller-i...