IP Telephony and Phones

On a CME with "no forward local-calls" configured on the DN's, is there a way to treat incoming VoIP calls from another CME site as "local calls" so they are not forwarded ?I would like the call forward setiings to apply to incoming PSTN calls only, ...

Calls placed to PSTN complete fine with voice path, calls placed between IP Communicator and Cisco IP phone (7960) complete with vf path,calls from IP Communicator to IP Communicator complete but no voice path.IP Communicator 7.0.3.0Call Manager 4.1N...

Hi! On the router Cisco 3825 approximately each 2-3 minutes I have a message: "CAS: %SCHED-2-EDISMSCRIT: Critical/high priority process VTSP may not dismiss."Does anybody know what does it mean?The router has IOS (C3825-ADVIPSERVICESK9-M), Version 12...

Hi all, there's a way to enable the address-book (and the name displayed on incoming call) and the phone's speed-dial when I'm running over CME-as-SRST mode? Now I'm using version 8.1.ThanksPasqu

Hi,I have two trunk lines(say X & Y) and a pbx line (Z) . I have configured six phones on which these lines are going to be used. If I make a call from phone A, from line X, than all other phones should get indication that line X is busy and user mus...

Dear AllI have integrated cisco Phones 7911, 7960 and 7970 with avaya CM using SIP and everything is running fine. As we know there is an extension mobility service for avaya. My question is that is it possible to use the EM service of avaya with a c...

helloi need your help to test the fax over ips started with T37 FOIP in my lab ,i used a router cisco 2801.So I configure my router using onramp and offramp script .in the testfrom the fax machine to email work fine without a problemthe problem if i ...

Hi everybody,  I want to know how to recover the transferred calls to an internal extension and if this is not answeredthe call is send to the extension who initiated the transfer.  I know I can pickup the call, also that I can transfer the no answer...

Hello pro's !I have a CUCM cluster that runs on version 7.0.2-20000-5.One publisher and one subscriber.Last week, the publisher needed to be reinstalled, because of an inconsistency error.After backing up the publisher, we have the following behavior...

Hi all,I have a problem and I don`t see the solution in CUCM and Voice Gateway.I have two different DIDs assign to hunt groups with different members in each one.When I call to a DID with number XXX XX X4 07, I see the call enter into the voice gatew...

I have a UC520 with a client that wants to be able to park multiple calls to be picked up by any available extension. I've created a collection of park slots with the same extension number but when we attempt to park incoming calls the station rings ...

Hi guys, I am experiencig this problem to complete h.323 calls.When a second call is stabilished from/to the remote site to/from the HQ one, the remote user never hears the user at HQ site but the user at HQ side ever hears the voice of remote user.P...

Hi Everyone - thanks for your help in advance!Running CME 7.1 and CUE 3.2.5...I created 120 users w/ CLI in CME and when I attempt to sync them with CUE in the GUI nothing happens....I click on Synchronize Information and it just sits there - no erro...