Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
How can I verify how many SRST licenses I have (if any) on Cisco 2821 router?The person who purchased router is not working with us anymore and I cannot find purchase documents.Is there any line command which allows you to find out number of SRST lic...
I have centralized call processing cluster and more than 100 remote sites that have 2921 GWs configured as H323 plus they work as SRST for the local users. the remote gateways also have CUE working as VM and AA and they have FXO pots for local users ...
I want to configure extension 9791 with 2 CIsco IP Phone 7965 and on dialing ring go to both IP PHs. How we can configure this?
The phone currently has only character 13 positionsto display data from the "Line Text Label".Using CUCM v7.0.2Is it possible to remove the cisco logo to add space for extra characters?Orbeneath the displayed text is another space,is there another fi...
Hi all,I tried to configure attendant console using CUCM 7 but each time I am running the client I am receiving this message:"Unable to connect the server "I know that Cisco before announced the EoL and EoS for this product, but I think this mean t...
i have cucm 7.1.3 with ATA 186 v3.2 for many fax machines. the extensions assigned to ATA is in the range of DID/DOD. i can send and receive faxes normaly except when sending to right fax (i wan here the right fax server prompt and i entered the exte...
To All experts,I have a need to change DN number of one of the sites, there are a total of around 200 numbers. What will be the easiest and fastest way to achieve this? I have CUCM 7.1One way that I think of is to delete all the phones/DN's and impor...
Dear All,I have an issue with the incoming calls on the fxo ports of Cisco 2811 mgcp VG ,that is registered on CUCM 7.1.3 ,the issue is if the PSTN callers disconnect the call before the called number catch the call,the (called number which is the at...
Were looking to integrate a Valcom IP paging system. Says it integrates via sip trunk. If we have CME with just pots dial-peers and no h.323 running, can we do a sip trunk off the CME router (running standard voice image) without having to pay for ...
Hi,I having a problem. I have a SIP-TRUNK using a CME (router 2921). I also have installed an ISM-300-SRE unity express module,When i call the pilot number, wich is transfer to the AA, th AA receives the call. But when i dial an extension, the AA t...
HelloI Have CUMA 7.1.3 server and I can try Import CA Response but I get this message error:Public Keys in the reply and the certificate corresponding to this context do not match.The Certificate I get of VerySing.Any Idea for this message.Regards.
Hii have cucm 8.0.3 cluster and i integrate with Nortel CS1000. I have no issue with voice calls between the two system.When calling from Nortel phone to Cisco phone i can see the name of the caller on cisco phone evenm before answering the call. Whe...
Okay, I have an installation where the switch access port faces a phone (7942 or 7962) with a subtended PC.The PC is also running a Cisco softphone (IP Communicator).The switch config has the option of programming the port to trust either a phone OR ...
when i call from linksys SPA922 to cisco IP Ph 7965 or 7975. i get extra delay in dailing extension. how i can reduce dial time on localextension from linksys IP PH 922/942 to Cisco IP Ph 7965?
I got Unity Connection cluster 7.1 for which I want to run RTMT, I got rtmt from cucm 7.0 but it doesn't work, gives me an error saying not compatible with the backend system. where can I get a the rtmt to run it on my uc 7.1(5) ?
