IP Telephony and Phones

Dear Team,We are facing error while logging through the Cisco IP Phone , but if we press services button in IP Phone that error will go and will be logged in to the phone.Error message : Error Response Language resource not available: java and .util....

Hi everyone,Due to cost analisys, I´m trying to monitor the total number of calls (getting detailed information) during a day (10 hours)  in my gatekeeper. So the question is, is there any debug for this purpose?I´ve used CDR but I don´t get the info...

My external calls come in via a digital PRI on my MGCP gateway.  The telco sends the last 4 digits of the dialed number.  So for example an external call to 123-345-6789 comes in as 6789.  6789 is a route pattern to my Meeting Place.  So internal cal...

Hi,    I have installed CUCM 7.1(2).I am having problems configuring it.Though I have done the same thing what i did for CUCM 6.1 ,I am  not sure something is going wrong.I am able to make internal PBX calls but not able to make external calls .Pleas...

Looking for the following items. Tried searching for it but didnt find a suitable solution for the following points. 1. A hardware security token to support secure remote access. 2. UC Portal- A UC Portal that allows user to connect to their Services...

Hi All, I have a Customer who recently orderd MCS Unified CM 7,1 7816-14 Appliances(QTY = 2).I am doing the installation of Servers.They want to upgrade CUCM from 7 to CUCM 8.Is it possible that i can upgrdae from current version to CUCM Version 8.0T...

Dear NetPro gurus,One of my customers have recently bought a brand new Cisco CallManager 8.0.  They have also purchased a lot of Cisco 9971 phones with it.For the Receptionist, they are also using the Cisco 9971 phones.  What my customer wants to kno...

Hello everyone, I have a proble with a callmanager with a trunk sip against IVR of prosodie. I'm going to try explain the problem.The call come in to CallManager and this send the call to IVR through Trunk SIP, until here everything are ok , then the...

My apologies if this is a double post, I think my original went to the wrong forum.I'm using CME 8.x on a 3800 ISR,  and a couple of 6921 phones.  Two of them have ~8.5.3 code, the others  have 9.x code (phone loads).  If I'm understanding things cor...

Hi All,I have a H323 gateway (Avaya) added into a CCM 4.1.3 , when Cisco Phones receive calls from the Avaya gateway, the phones only show unknown number (external) but the Avaya phones can see the Calling Party Name. Any idea what I should set on th...

Hello All - We have Cisco IP Phones 7965 and would like to configure  one of the button to do an intercom call to one specific person. The  user would click on this assigned-intercom button and auto-dial the  assistant. The person initiating the inte...