Hello everybody,I need some help to select a backup solution for PRIs failure in the following environment. We are working with CUCM6 cluster and 2 PRIs, installed in 2 2821 voice gateway each one. I've been told to manage a backup solution through 6...
Need to provision Voice Gateway for a Remote Site withBandwidth 45 Mbps and total Users 3-14What VG should be selected and does T3/E3 the same as DS3/T3?RegardsSumit
Hi,If someone could confim for me that for outbound calls from CUCM 7.1.3 to the PSTN that a CDR record is only generated when the call is connected & not just when it rings out at the far end.Thanks in advance
Hello everyone, hope your are doing great!I have a CUCM cluster running for about 6 months. Yesterday, I log in to Disaster recovery menu to make a backup.In publisher node, I can get in back up menu, do back up. But in subscriber node, I got this er...
Is there any way possible to have a group of devices to be assigned a resource to let a group of people "only" manage specific devices?It would be nice for them to manage only their local equipment and not have the ability to see all phones and gatew...
All,I have the folloinwg configuration for number translation on CME:Can anyone let me know how the translation works? Will it remove any outgoing called number 61? I am a little bit confused on outgoing called and outgoing calling numbers, what is t...
Morning Chaps,Wonder if anyone can help here. We have a CUCM 7.1.5 cluster 8 servers in total, all is fine however we installed a whole load of ATA's and some were working and some not. Looking at the compatibilty matrix 3.2.4 is the supported load,...
Just upgraded our cluster to 7.1.5.31900-3 and now a new ATA 186 won't register with CCM. Tried another brand new one to no avail. It would get an IP address that is pingable but won't allow web access to it with an error "Invalid access". Hooked up...
i have the following issue and wanted to see if anyone out there has the gear layout.CUCM is 7.1 .22921 pvdm3-128 ios 15,0 Mtranscoding or mtp resources fails everytime invoked. regestered fine with cucm but according to ios gateway compatability mat...
I recently changed my password ccmadministrator of the CUCM. Since in my logs i have the following message It seems that this Unity tries to log into the administrator account with CUCM. I do not know where to find in unity the process that does.So...
Hi to all,can a sip 7931 phone monitor sip lines? We are working with cme 7.1 and cannot make it work.I tried with blf speed dials but not work.I think that the 7931 sip phone does not support this feature.Thanks for your help
we already have failover configured for both Unity and Call Manager, do i still need to configure disaster recovery? can somone give me scenario fo when i might need to restore unity or cm files? Thanks.Marlon
Hello All,I am getting ready to do a Unity Connection upgrade from 7.x to 8.x. Its been awhile since i did a unity connection upgrade. I recall when i did the switchover from one partition to the other it took about 45 minutes. If I remember right...
Hi AllI have a query just want to know that how the switch say Cisco 2950 will classify Voice packet as Cos5 or dscp- 46.As this is a softphone and there is no funda,mental of hardphone data and voice packet both going from same LAn port.Appreciate y...
I had an issue over the weekend hereby calls via a H323 gateway when transferred to a user after terminating on another handset would be cut off or when transferred due to CFNA to Voice Mail . After reading up I discovered I had to ticked MTP on the ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 03-04-2026 06:20 AM | ||
| 03-02-2026 07:40 AM | ||
| 03-02-2026 07:34 AM | ||
| 01-16-2026 03:24 AM | ||
| 12-31-2025 01:52 PM |
