Hello,how can i retrieve a specific VM for a specific user on CUC version 1.2 . on regular unity i usually go to the exchange server . thanks in advance.
Hello,how can i retrieve a specific VM for a specific user on CUC version 1.2 . on regular unity i usually go to the exchange server . thanks in advance.
Hi,I have an H.323 gateway that I'm trying to get caller ID working correctly on. I've got it working to where the number and name display while the phone is ringing but when the user picks up the phone only the name displays and the number is not t...
Hi,We have a CUCM 7.1 and a 2821 with 2PRI connected to the PSTN.When calling outbound from an IP Phone 79xx (7911, 7945, etc) to the PSTN we got the following error:Dec 14 10:18:26.249: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x070D...
Hello Every one. I am implementing A centralizaed system using call manager 7.13. I need to replace old key system that supports annoncement ( I think that is the world in english). IT consist that when the user dial an extension the key system sen...
I have a problem that I do not know how to fix. A new system has been installed and the problem that I am facing is that people have their own extension but also have line appearances of other people as well. What happens is that if they push the m...
I have CUPS 7 assicated to a test cluster 7.x , can I and how mucheffect is involved to re-point it to another Cluster running 6.1.2 or do I need to re-install it againthanks
Dear All,Anyone can help me out the exact procedure of migrating the device licenses unit from one MCS server to another MCS server...I have one MCS server with call manager 6.0 and registerd with 300 IP Phones but i have scraped this MCS server a...
We have a client that has an emergency and not much money to purchase a nice new 2900 series router and NM-CUE so we are trying to quicky use the 2651XM that was running SRST for CallManager server that was offsite to run CME.So here is the lowdown -...
Warning: I'm extremely new to CUCM.I am curious as to what all is involved in connecting two CUCM (7.1.3 and other) systems together. By this I mean I have a CUCM setup here and someone else has it as well. I want people to be able to make calls betw...
Is it possible to configure an SRST router to map phones' mac addresses to static DNs?The problem is that the phones are configured for extension mobility in normal operation. But, when the WAN link fails, users who are not yet logged in cannot do so...
can any one tell me what is the best way to record the calls and do the accounting also for the calls is it a feature built in with cucm 6.1 or this can be achieved by some extra module please suggest...Jatin
Hi,We have a problem to upgrade IP Phones 7962,7961 and 7971 form 8-5-3 to 9-0-3S.If we upgrade one single phone then everything works fine the during of the upgrade is ca. 7 - 10 minutes.But when we upgrade more then one phone (2 - x) at same time w...
is possible to change background in those ip phones with Callmanager express 7.x? and how is that configuration?thnks
Hi all,Currently I'm running a acceptance test on a SIP Trunk from our ISP. Everything is working fine except the DTMF.Setup:[GenBand SBC] ---- [SIP Trunk into CUCM 7.1] ---- [Cisco Unity Express 7.0]The SIP Trunk as well as the CUE are in the same r...
Guys,Just want to ask this question.I have a UC project I am working on.It consists of CCM7.X and Unity Connection Cluster.CCM7.X will be integrated with LDAP. My question is should I intergarte Unity Cnnection with LDAP too.? Or I should just pull a...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-14-2025 08:15 AM | ||
07-09-2025 09:52 AM | ||
07-08-2025 12:50 PM | ||
07-02-2025 08:49 AM | ||
07-01-2025 09:51 PM |
User | Count |
---|---|
2 | |
2 | |
1 | |
1 | |
1 |