Hi,I am using CUCIMOC in CUCM 7 and windows 7. everything is working except when I call from CUCIMOC in softphone mode, there is no audio. I've already setup audio and video in MOC for CUCIMOC. any suggestion would be very appreciated.thanksAlex
Hello we just got a complain that incoming calls get staticwe have a cucm 6.1.2 cluster of 2 servers and 2811 with a pri locally to remote locationsone of this locations is complaining about static and dropped callsi was checking the controller of th...
HiI have a CUCM 6.1 (5) Cluster and Unity Conection.The proble is When the publisher is Down and subscriber works, the user press VM Button is not available.But when the publisher is work and the user is avialable.soOn the unity I configure in the t...
Dear all,I have a problem when configuring recording with Callrex Recording. I use Silent Monitoring and Call Recording features instead of SPAN method. I have prepared everything for this method and tried the below scenarios:Phone A (7911G): Built ...
I am running CM Business Edition 7.1.3. I have configured Unity Connection to send users the voicemail messages that they recieve via an SMTP smart host. Users are recieiving the .wav files without a problem.Question is, can I change the "from" add...
hi,i´m implementing a transcoder in a cisco 2801 Gateway with IOS Version 12.4(13r)T,it have 2 DSPs, 32 Voice resources and i configure transcoder with 16 sessions.all works fine, the transcoder its registered to the ccm (ccm V6.1(2)), but after a 1 ...
I have a customer who is trying to set up a SIP 7945 for an external SIP provider. However, we cannot figure out how to unlock the settings so that they can be manually configured. All the documents I have seen so far only talk about changing setting...
Hello All,I'm trying to set up a translation rule and I'm getting invalid string as return, for me the command is correct. I saw the exactly command on a different router.Any help appreciatedRIO1RT009448(config-translate)#rule 1 /^.*/ /9&/ subscriber...
I have a Cisco ATA 186 and I would like to connect this to a Valcom 1109RTVA. If I connect an analog phone to a port on the ATA, the phone rings, but when I connect the extension just rings ... Has anyone had experience connecting a Valcom 1109RTVA t...
Hello,I'm trying to patch a cluster callmanager 4.2(3)SR1 to 4.2(3)SR2, the patch is instaled well in the publisher but fail in the subscriber with the message error "Error Fatal : Replication initialisation failed, please make sure that all nodes in...
Hi Team.My customer is using CUWL, and need to have a failover unity server.How is that ordered, I can't do it in DCT.I've looked on the UCSS contract, here I'm able to order : "UTY7-E-32P-UWLADD" Wich is a additional unity server, but is that a fail...
Hi,We have many remote sites. and use CCM cluster at two "Headquarter".All remote site connect in the CCM.site 1 have DN 1XXXsite 2 have DN 2XXXsite 3 have DN 3XXXsite 4 have DN 4XXXIf the link between Headquarter and site 3 is cuted down,does site 3...
All,I have a CallManager at NYC and another one at Dublin. The two offices can all each other through IP WAN.Can I configure the NYC CallManager so that if anyone called a NYC number, it will ring a Dublin phone?Thanks
One of my clients is a police station using CUCME/CUE. A recent lightning strike has taken out a legacy call recording system and they are looking for a replacement.Do you know if there are any such systems (Cisco or third party) that integrate with...
Hi.I have a cluster of two server Publisher and Subscriber.I want to add these Servers in Network Node Management for Monitoring Purpose how i can configure SNMP on these Server.Please advise me how i can do this.RegardsJamilhussain
