Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,My customer will change his Call Manager version from 6.1.4 to 7.1.3. The cluster (and phones) use security on phone.I want to know if it is necessary to uninstall security before upgrade ? Could you give the documentation on the Cisco Web site ?T...
Dear All,I m running cisco router 3845. I have 28 fxo ports. Out of these 28 ports i need 6 dedicated ports for outgoing calls on priority and 6 ports for incoming only.Please guide me how i can accomlish this task.Regards,Malik.
I am doing a new install of CUCM 7.1. I have LDAP setup and a couple of phones associated with my new CUCM environment. I also have a user associated with each phone. When I go to the ccmuser login page, we enter our AD account info and it acts as if...
Debug voice ccapi inout is attached.The numbers as follows: Originating number: +86 – 212 – 850 – 7205Destination Number: +65 – 6215 – 7878 Voice Gateway has E1 controllers 1/0, 1/1, 2/0 and 2/1. When calls are established via 1/0 or 1/1 the call...
Hi,I have an issue with CDR information for calls that have been routed via a huntpilot. In the finalcalledparty field we see the external mask of the final phone rather than just the DN, but this only happens if we originally called via a hunt pilot...
Hello everybody,I see this message in the 3560:Feb 4 11:30:38.939 CET: %ILPOWER-5-IEEE_DISCONNECT: Interface Fa0/21: PD removedFeb 4 11:30:40.608 CET: %ILPOWER-7-DETECT: Interface Fa0/21: Power Device detected: Cisco PDFeb 4 11:30:41.053 CET: %ILP...
I tried setting up a tftp server using tftpd32m with ip504g phone.The server does not seem to communicate with phone hostand error rcvd is"Error in RecvError code is 10054 (an existing connection was forcibly closed by the remote host)"Any clues on h...
hi all, we have CCME. the actual hunting sequence of our main line does not match our configuration on the IP phone Call Manager. !voice translation-rule 200 rule 1 /2701/ /17562700/ rule 2 /2780/ /17562700/ rule 3 /2702/ /17562700/ rule 4 /2703/ /17...
Hi all,does anyone knows the ports used when I access ccmadmin & ccmuser web pages?
Could anyone help me regarding our VOIP..We are experiencing unstable call connection in our gateway. We have E1 link (DID/ DOD) with 30 channels (17 Incoming & 13 Outgoing).During the day will experience (4 to 5 times) call drop out, and once we che...
Hi allI got a CUCM7.0 and need some advice about licensing.With the basic setup, the CUCM is shipped with 50 Phone License units. Which license-upgrade do I need toorder to get an upgrade to 500 units.Who can explain me those license below?INCREMENT ...
We have CUCM 6.1.1 that is being used for 3 different offices. Each Office has each own reception. I just got a request so when the users dial 0, it will go to the respective office. Our vendor that installed the CUCM has created for 2 of the offi...
I have a CME install with 3 ATA's connected to 5 fax machines, two per each with the last one having one. When I configured them and tested each with a phone they worked fine, for both incoming and outgoing phone calls. At the time of install they ...
Hello,A client wants to have the call feature below. I am wondering if it is possible with Cisco IPT.When a call is connected and the user is talking, if a second call coming, the user wants to see the second call on his phone but the second caller w...
Hi to everyone,It would be a great help if anyone guide me to find out symantec end point protection supported versions in CCM 4.1.3 ?siva
