Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello Guys, I have a lab setup with 2 2621XM routers with VWIC-1MFT-T1 1-Port Multiflex Voice Cards in them with a crossover cable between the devices. When I go under the controller interface below to use the PRI_GROUP or DSO-GROUP com...
Guys, I am recently working on a project with CUBAC been deployed. The customer has full E.164 (eg +441228406699) numbers in AD because of CUCiMOC. However the extensions in CUCM are 4 digits.(6699) When a search is made on the console, it returns...
Hi Pros, We have a remote site with a bunch of 7912 and one 7940, as it is a remote site. We only have one cable drop at each cubicle, so the PCs are connected via the biuld in switch of the 7912. Every now and then, customer keep compla...
Hi,We have given CO lines thorugh Huawei NGN platform, and which is connected to Cisco call maner through CISCO 2801 router. Frequently, the incoming calls dropped and Cisco 2801 router gets crashed. Once I manually restart the router lines works for...
Hi everybody. First at all, I am relatively new in this area so I hope you will understand if something in my question does not make sense. Now, my question is this, in a company there is a CISCO voip gateway which model number is: IAD2431-16FXS. D...
Hi all,I have 2 PGWs with one STM -1 each.I need to show the active E1s on them also I need to know the trunks' utilization.What are the show comands i should use?Any help...Regards,Ahmed Kamal
Is there a limit to how many non-CM service based servers can be in a cluster such as MOH or TFTP?Manish
Dear all,Could anybody tell me how to configure incoming call via E1 interface to MGCP Gateway. If i'm using H323 Gateway, i just need to add command direct-inward-dial in the outbound dial peer to make it inbound dial peer.I'm also facing a situatio...
Hello:Just a looking for some feed back... we've had some interest in the Web Dial widget (click to dial). And while it looks very easy to implement, given some changes to our telephony environment I know are coming I wonder if we should avoid this ...
I have Call Manager 6.14.2190-3 with 2 phones and a shared line same partition.When a call is answered it does not busy out the 2nd phone.A second call can still come in.I think this has changed when I upgraded from 6.1 flat.Would like to make these ...
Hi all,Could someone share a link or a document on how to configure DHCP server in IOS with option 150 for CUCM ? I am trying to configure DHCP on a 3750 switch for a test environment. Thanks in advance !!!D.
Hi, Need one help. I have CME on 2811 Router. Do I need to purchase License from Cisco for Registering the IP Phones?? I have near about 40 phones.. Rgds, Partha
Set to upgrade from 4.02 to 4.13 this weekend. Checking the caveats a major one is Important: Remove any call forwarding that is set on voice-mail ports that are used only for outbound calls and message waiting indication.Where exactly to I disable ...
Hello,Why are some of my ip phone services not showing on some of my phones, yes i have subscribe the phones to the respective ip phone services, reset the phones several times and nothing, does anybody know why? thanks
Running MPE 2.1.1.2 from a recent upgrade, all is working fine but we just notice that the link to download the outlook Plug-In is not at bottom of the page anymore, after checking Cisco MPE documentation I have verified the following in the administ...
| User | Count |
|---|---|
| 6 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
