Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello all,I need to convert the called number from 901[0-9]....... to 3000, how can i do that?Any ideas,,,,,thanks a lot.
Hi,We just got few 9971 phones and we were trying to configure them in our cluster although there is no drop down for 9971 phones, we tried to configure them as sip phones but still not registering correctly does anybody knows how to configure or add...
Under CallManager 4.1(3) using DMA 7.1(3) it doesn't export data;going to GetStartupInfoA() going to CreateProcessA() going to WaitForSingleObject() going to GetExitCodeProcess() GetExitCode returned TRUE (success)return value = 1ExportDatabase, retu...
Hello,I have an H.323 Gatekeeper service running on a 2811 router. I have 11 clusters on my IP WAN which all use this Gatekeeper to control our inter-site calls between the clusters. The Gatekeeper works fine and has been in production for close to...
Hi,Just wondering if there is a way of getting a Cisco IP phone to work at a remote site location (Not connected to our LAN / WAN)? If so what extra kit / config work would be needed to get it to connect to our main branch?We are currently running CU...
I am quite familiar with what the CFwdAll button does. I was wondering if there is a way to program a 7961 phone to ring to another extension from 4:30 PM until 6:00 AM.Thanks
Hi all,I have seen "%" sign used in IOS voice translation rules, but I can't find it in any translation rule config guides. What does it mean and how to use it?thanks
Hi all, I have a CM 7.1.3 and want to see debug messages regarding ip set registering - like I do on the CME.Can you help me and tell me how to do it?I already activate the trace on tftp events but don't know how to see on this release.Best Regards,J...
Has anyone utilized the new multiple MOH sources in SRST 8.0 - was looking for an actual configuration when SRST is in standby mode (using CUCM for MOH - spoofing). I have downloaded the new SRST 8.0 MOH Enhancement/New Features Guide, but it is sor...
Hi to everyone,I have a CCM 5.1.3.We did a bad planning about the total of phones for our office and now we have an excess of licenses loaded in our CM.The question is, can I download a number of licenses of my CM and use them in another CCM for anot...
Could please some one confirm do the Unified Mobility Advantage is integrated with CUCM 7.1 or do we need to buy seprate server for this. Client needs Cisco Unified Mobile Communicator in Nokia N series Wireless IP Phone.
Hello,I have to perform an upgrade from Unity 4.0(4) to 7.0 on new hardware. My game plan at high level is below:1. Build out the exact same version of 4.0(4) on the new HW (consists of 1 Unity Svr and 1 Msg Store Svr)2. Once running on 4.0(4) upgra...
Hmmm...So I'm trying to migrate from a 2600 to 1760. DSPs are installed, as is a VIC-2FXS card. But I'm having no luck getting the DSPs or voice ports to show up. Any ideas?# sh verCisco IOS Software, C1700 Software (C1700-SPSERVICESK9-M), Version...
I have the following set as night service:night-service weekday 16:30 08:30night-service weekend 00:00 23:59However, Monday mornings night service mode is not on...I imagine it is turned off at 00:01...I can't seem to figure out how to make it so tha...
Using CER 7.1.1.10000-5 with CallManager 7.1.2.31900-1, I've tried using the AdminUtility to change CER to CallManager version 7.1 and 7.0 with no luck as I read another post that suggested trying that. I have CER 7.1.1-10000-5 in the lab with CallM...
| User | Count |
|---|---|
| 9 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
