IP Telephony and Phones

Hi, I am having a problem with route lists in CCM 702. I have 1 route list with 2 route groups in it. Each RG has 1 Voice Gateway in it. My problem is when my Primary PRI circuit goes down on the Primary Voice Gateway, calls fail to re route over the...

We are are trying to broadcast a message dialing from a Cisco phone 7961 to the "Genie" on a Vocera Server.We can Broadcast Vocera to Vocera  and Cisco Phones to cisco phones. But when we try to do the broadcast fro the Cisco phone through The Vocera...

I have an appliance CUCM 7.1.2.20000-2 on IBM hardware 7825-I4.It's a cluster with publisher and one subscriber. After configuring the system works well.Locale installer and network locale for german are installed.I wanted upgrading to the newest ver...

Hi,Can any one tell me how to set the settings on CUCM(7.1), where i can define only the name to be dipslayed on IP phone & not the DN while calling to other person.I tried changing the settings on UDPDevice > Device SettingsDisplay(Internal Caller I...

Hello,Our customer has 2821 with CME and SCCP IP Phones. For external calls they use SIP trunk. There is a requirement of the SIP provider that the prefix 11111# should be prepended to all calls. I know how to do it. That’s not a problem. But I stuc...

Hi,I do have Analog lines. I need any call land on the Operator Phone (DN: 200) will ring 3 times, if the Operator doesn't pick the call within 3 rings, call will be forwarded to the Call Handler where a message will be played & based upon caller inp...

Hi there,I was wondering if I can use CUCM 7.1 connecting through a SIP Trunk to Voipbuster or anyother SIP provider.Thanks.Regards,YSana

Hello everybodyI need help in QOS issue, we have 2 branches A and B, A connected via MPLS "Frame-relay" with 2 Mbps connection and B the same like A but with 256Kbps connection, both of the 2 branches connected via the MPLS cloud with many other bran...

Hello,a costumer has an analog phone connected to an ata186.When he is calling out and the call lasts longer den 30Min , the call gets automaticaly disconnected.The IP-Phones work without problems.Is there a timer which disconnects calls after a peri...

Does anyone know whether it's possible to send either a text or email message to a Cisco 7925?